SMA Storage M: the new modular high-voltage battery explained

Guide · SMA Storage M

The SMA Storage M is a new modular high-voltage battery from SMA for residential homes and small businesses. It uses LFP cells, is designed for frequent charging and discharging cycles and can be expanded from 12.3 kWh to 49.1 kWh of usable capacity per tower.

In this guide we summarise what the SMA Storage M offers according to the manufacturer's documents: all ten capacity levels, technical data, compatible inverters, warranty and the difference from the SMA Home Storage.

Go to technical dataAll SMA products

Key facts at a glance

Modular from 12.3 to 49.1 kWhOne BMS unit plus 3 to 12 battery modules, each with 4.09 kWh of usable capacity. The maximum possible size depends on the inverter.
Made for dynamic tariffsLFP technology, designed for frequent charging and discharging cycles. According to SMA, up to 7.2 MWh of energy throughput per kWh, depending on the country of installation.
Indoors and outdoorsIP66 protection and operation from −20 °C to +50 °C. The modules are stacked, no internal cable connections are needed.
Compatible invertersApproved for the Sunny Tripower Hybrid X and the Sunny Boy Smart Energy. Warranty: 10 years after registration with SMA.
New from SMA, as of November 2026. SMA presented the Storage M in June 2026 at The smarter E Europe in Munich. According to SMA's press release, the new components will be launched in stages from the second half of 2026, starting in Germany. All technical values in this guide are taken from the SMA datasheet STM-BM-10-DS-de-10 (as of 07/2026).

What is the SMA Storage M?

SMA describes the Storage M as a compact, modular high-voltage battery for residential buildings and small commercial applications. Together with the Sunny Tripower Hybrid X and Sunny Boy Smart Energy hybrid inverters, it stores solar power so that it can be used in the house in the evening, at night or during low-tariff periods.

A battery consists of one BMS unit (STM-BMS-10) and 3 to 12 battery modules (STM-BM-4.09-10). The modules are stacked on top of each other and connected without internal cables. According to SMA, commissioning is automatic via plug and play in the SMA 360° App. An LED display shows the state of charge.

SMA Storage M modular high-voltage battery with stacked battery modules
The SMA Storage M: BMS unit on top, stackable battery modules below. Image: SMA Solar Technology AG

All capacity levels at a glance

The type designation corresponds to the usable capacity. Each capacity level consists of 1 × STM-BMS-10 and the stated number of STM-BM-4.09-10 modules.

Capacity level Modules Nominal capacity Usable capacity Nominal voltage Height (W 530 × D 405 mm) Weight Approved for
SMA Storage M 12.3 3 12.99 kWh 12.28 kWh 172.8 V 605.5 mm 120 kg Hybrid X 5–30, Sunny Boy Smart Energy
SMA Storage M 16.4 4 17.33 kWh 16.37 kWh 230.4 V 738.5 mm 155.8 kg Hybrid X 5–30, Sunny Boy Smart Energy
SMA Storage M 20.5 5 21.66 kWh 20.47 kWh 288 V 871.5 mm 191.6 kg Hybrid X 5–30, Sunny Boy Smart Energy
SMA Storage M 24.6 6 25.99 kWh 24.56 kWh 345.6 V 1004.5 mm 227.4 kg Hybrid X 5–30, Sunny Boy Smart Energy
SMA Storage M 28.7 7 30.32 kWh 28.65 kWh 403.2 V 1137.5 mm 263.2 kg Hybrid X 5–30, Sunny Boy Smart Energy
SMA Storage M 32.8 8 34.65 kWh 32.75 kWh 460.8 V 1270.5 mm 299 kg Hybrid X 5–30
SMA Storage M 36.8 9 38.98 kWh 36.84 kWh 518.4 V 1403.5 mm 334.8 kg Hybrid X 5–30
SMA Storage M 40.9 10 43.32 kWh 40.93 kWh 576 V 1536.5 mm 370.6 kg Hybrid X 20–30
SMA Storage M 45.0 11 47.65 kWh 45.03 kWh 633.6 V 1669.5 mm 406.4 kg Hybrid X 20–30
SMA Storage M 49.1 12 51.98 kWh 49.12 kWh 691.2 V 1802.5 mm 442.2 kg Hybrid X 20–30

Usable capacity according to SMA under test conditions (94.5 % DOD, 0.2 C charge and discharge at +25 °C). For the Sunny Boy Smart Energy the datasheet states the upper limit as “up to SMA Storage M 28.6”; SMA specifies the charge and discharge current of 30 A for the Sunny Boy Smart Energy for levels 12.3 to 28.7.

Technical data for all capacity levels

Feature SMA Storage M 12.3 to 49.1
Cell technology LFP (lithium iron phosphate)
Charge and discharge current 30 A with Sunny Boy Smart Energy, 50 A with Sunny Tripower Hybrid X
Round-trip efficiency (RTE) 93.5 % (datasheet: at a C rate of 0.2; C rate of 0.5)
Energy throughput up to 7.2 MWh/kWh, guaranteed value depends on the country of installation
Battery module STM-BM-4.09-10 530 × 133 × 405 mm, 35.8 kg (datasheet body text: 36 kg)
BMS unit STM-BMS-10 530 × 140 × 405 mm, 11.3 kg
Operating temperature optimum 15 °C to 30 °C, permitted −20 °C to 50 °C
Cooling natural cooling
Degree of protection IP66
Relative humidity 5 % to 100 % (non-condensing)
Installation altitude below 3,000 m
Protective devices input-side disconnection point, DC reverse polarity protection, overvoltage category II / II
DC connection MC4 Evo 2
Communication RJ45 (CAN), SMA battery interface
Certificates CE, UN 38.3, IEC 62619, IEC 62477, VDE 2510-50
Warranty 2 years, 10 years with registration within 30 days of initial commissioning

Which inverter is compatible?

The SMA Storage M works only with SMA hybrid inverters. The inverter determines how large the battery can be:

Inverter Maximum capacity level Charge / discharge current
Sunny Tripower Hybrid X 5 to 15 SMA Storage M 36.8 (9 modules) 50 A
Sunny Tripower Hybrid X 20 to 30 SMA Storage M 49.1 (12 modules) 50 A
Sunny Boy Smart Energy according to the datasheet up to SMA Storage M 28.6 30 A

You can find the three-phase Sunny Tripower Hybrid X 5, 6, 8 and 10 in our shop:

To operate the Hybrid X, SMA requires an approved energy meter: SMA Energy Meter, SMA Energy Meter CT or Sunny Home Manager 2.0. Read more about models, backup power and energy management in our guide to the Sunny Tripower Hybrid X.

Who is the SMA Storage M suitable for?

SMA names four typical applications:

Dynamic electricity tariffsThe battery is designed for several charging cycles per day. This allows it to charge when electricity is cheap and discharge when it is expensive. SMA also names energy trading and virtual power plants (VPP) as possible applications.
Homes with high self-consumptionAnyone who wants to use a lot of solar power themselves needs sufficient storage. With the Sunny Tripower Hybrid X 5 to 15, up to 36.8 kWh of usable capacity is possible.
Small businessesWith the Sunny Tripower Hybrid X 20 to 30, up to 49.1 kWh of usable capacity per tower is possible.
Applications with backup powerSMA names applications with backup requirements as a field of use. For supply during a grid outage, SMA combines the battery with the SMA Backup solutions.

According to SMA, the Storage M can be expanded within two years. If you will need more capacity later, you should plan the expansion early. Your installer will determine the right size based on consumption, PV power and inverter.

SMA Storage M or SMA Home Storage?

Both batteries come from SMA and are approved for the Sunny Tripower Hybrid X. They differ mainly in module size and capacity range:

SMA Home Storage SMA Storage M
Battery module HS-BM-3.28-10 STM-BM-4.09-10
Modules per battery 1 to 5 3 to 12
Capacity levels 3.2 to 16.4 12.3 to 49.1
Approval for Hybrid X 5 to 15 (SMA) 3.2 to 16.4 12.3 to 36.8

The SMA Home Storage is therefore suited to smaller battery sizes, the Storage M to larger ones. You can find the SMA Home Storage in our SMA Home Storage category.

Frequently asked questions

What is the SMA Storage M?

A modular high-voltage battery with LFP cells from SMA for residential homes and small businesses. It consists of one BMS unit and 3 to 12 battery modules and offers 12.3 kWh to 49.1 kWh of usable capacity per tower.

When will the SMA Storage M be available?

SMA presented the battery in June 2026. According to SMA, the new components will be launched in stages from the second half of 2026, starting in Germany.

Which inverters does the SMA Storage M work with?

According to the datasheet, with the Sunny Tripower Hybrid X and the Sunny Boy Smart Energy. Up to 36.8 kWh is possible with the Hybrid X 5 to 15 and up to 49.1 kWh with the Hybrid X 20 to 30. For the Sunny Boy Smart Energy, SMA states up to SMA Storage M 28.6.

How much capacity does one battery module have?

Each STM-BM-4.09-10 module provides around 4.09 kWh of usable capacity. Three modules make up the SMA Storage M 12.3, twelve modules the SMA Storage M 49.1.

Can I expand the battery later?

Yes. According to SMA, the Storage M can be expanded within two years. The upper limit depends on the inverter.

Can the SMA Storage M be installed outdoors?

Yes. With IP66 protection and a temperature range of −20 °C to +50 °C, it is suitable for indoor and outdoor use. According to SMA, it works best at 15 °C to 30 °C.

How long is the warranty?

2 years as standard. 10 years apply if the device is registered via the SMA product registration (my.sma-service.com) within 30 days of initial commissioning. The terms of the SMA factory warranty apply.

How heavy is the battery?

One battery module weighs 35.8 kg, the BMS unit 11.3 kg. Depending on the capacity level, the complete battery weighs 120 kg (12.3) to 442.2 kg (49.1).

Does the zero VAT rate apply to the SMA Storage M?

For private customers in Germany, 0 % VAT can apply when a battery is purchased as part of a PV system, provided the requirements of § 12 Abs. 3 UStG are met. Find out more in our guide to 0 % VAT on PV.

Batteries and inverters from SMA

Are you planning a system with the SMA Storage M? Tell us your PV power, consumption and desired battery size and we will be happy to advise you. You can find the Sunny Tripower Hybrid X and other SMA products in our shop.

Sources

Note: This guide does not replace planning by a qualified installer. Clarify battery size, inverter and backup solution before purchase using the current manufacturer documents.

All information without guarantee. Subject to technical changes and errors. The current manufacturer documents from SMA are authoritative.

Back to blog