Huawei Luterra S2 – all information on the new all-in-one storage system
New for 2026 · Preliminary information
Huawei LUTERRA S2: inverter, battery and backup power in one device
With the LUTERRA S2, Huawei FusionSolar is launching its first home storage system under the new LUTERRA brand. Instead of installing the hybrid inverter, battery tower and backup box separately, the LUTERRA S2 puts everything in one modular tower. The system was presented in June 2026 at Intersolar Europe in Munich. Here we summarise what has been confirmed so far, how the LUTERRA S2 differs from the proven LUNA2000 S0 and S1 batteries and how you can register your interest in the system with B&M Distribution.
Send a non-binding enquiry nowWhat is the Huawei LUTERRA S2?
At Intersolar 2026, Huawei changed its storage brand from LUNA to LUTERRA . The LUTERRA S2 is the new all-in-one system for homes and smaller commercial properties: a hybrid inverter sits on top of the tower, and the battery packs are simply stacked underneath. The modules are connected via plug-in contacts, and according to Huawei, communication is completely wireless. Data cables between inverter and battery therefore no longer need to be laid.
With the previous Huawei solutions with LUNA2000-S0 or LUNA2000-S1 , on the other hand, you always need a separate SUN2000 hybrid inverter. The battery is installed next to it as a separate device.
The highlights at a glance
Technical data (preliminary information)
As of November 2026. Huawei has not yet published a final German datasheet. All values are based on manufacturer information on Intersolar 2026 and on trade reports and may change before market launch.
| Feature | Huawei LUTERRA S2 |
|---|---|
| System type | All-in-one: hybrid inverter, modular battery storage, backup, AI energy management |
| Inverter three-phase | 5 to 20 kW (power levels 5 / 6 / 8 / 10 / 12 / 15 / 17 / 20 kW) |
| Inverter single-phase | Announced by the manufacturer. The exact power range for Germany has not yet been officially published. |
| Battery packs | 5 kWh and 7 kWh, freely combinable |
| Capacity per tower | Up to 4 packs, i.e. a maximum of 28 kWh (e.g. 7 + 7 + 5 kWh = 19 kWh) |
| Expansion / cascade | Announced by the manufacturer: up to 3 units in parallel, three-phase up to 60 kW / approx. 336 kWh |
| Power electronics | Full SiC architecture, max. inverter efficiency over 99% (manufacturer information) |
| Cooling / noise | Fully natural cooling without fan, below 29 dB according to preliminary information |
| Communication | Fully wireless between the components, monitoring via the FusionSolar App 3.0 |
| Backup power | Backup function integrated. Huawei has not yet published the backup power rating. |
| Charging/discharging power | Not yet published |
| Battery pack weight | Preliminary information: approx. 46 kg (5 kWh) or approx. 57 kg (7 kWh). According to Huawei, up to 17% lighter and 43% more space-saving than comparable systems. |
| Installation | Installation under 10 minutes, commissioning under 5 minutes (manufacturer information) |
| Warranty | Not yet published |
| Price | Not yet known, on request |
Comparison: LUNA2000 S0 and S1 vs. LUTERRA S2
| LUNA2000 S0 | LUNA2000 S1 | LUTERRA S2 | |
|---|---|---|---|
| Design | Battery storage, separate SUN2000 hybrid inverter required | Battery storage, separate SUN2000 hybrid inverter required | All-in-one with integrated inverter |
| Battery modules | 5 kWh (LUNA2000-5-E0) | 5 kWh (5-E1) and 6.9 kWh (7-E1) | 5 kWh and 7 kWh |
| Power module | LUNA2000-5KW-C0 | LUNA2000-10KW-C1 | Integrated in the inverter |
| Capacity per tower | 5 / 10 / 15 kWh | 5 to 20.7 kWh (1–3 modules) | up to 28 kWh (up to 4 packs) |
| Charging/discharging power | up to 5 kW (at 10/15 kWh) | 3.5 / 7 / 10.5 kW (1 / 2 / 3 modules) | not yet published |
| Cooling | natural convection | natural convection | natural cooling, also for the inverter |
| Warranty (Europe, manufacturer policy) | 10 years | 5 years basic, extendable to 15 years with permanent FusionSolar connection | not yet published |
| Availability | available in our shop | available in our shop | expected early 2027, pre-registration possible |
Important: S0 and S1 modules cannot be combined with each other. Huawei has not yet confirmed whether the LUTERRA S2 works with existing LUNA2000 batteries or SUN2000 inverters.
Who is the LUTERRA S2 suitable for?
- are planning a new PV system with storage and have time until the market launch,
- want inverter, battery and backup power from a single source and with little space required,
- value a quiet device without a fan, for example in the utility room,
- want to control wallbox, heat pump and dynamic electricity tariffs with AI support.
- already have a Huawei SUN2000 hybrid inverter,
- want to expand an existing LUNA2000 battery (note the same series),
- need your battery now and do not want to wait until 2027,
- value final datasheets, warranty conditions and prices.
Availability at B&M Distribution
Huawei is presenting the LUTERRA S2 for Europe at its own launch event in Palma (Spain) on 9 and 10 November 2026. According to Huawei, the commercial rollout in Europe is to begin in November 2026. For Germany and Austria, trade reports mention a market launch in early 2027. There is no binding delivery date or pricing yet.
Would you like to plan the LUTERRA S2 into your project? Write to us. We will register your interest without obligation and get back to you as soon as the datasheet, prices and delivery dates are confirmed.
Enquire nowAvailable right now: Huawei LUNA2000 S0 and S1
Huawei LUNA2000 S0 series
5 / 10 / 15 kWh, 5-E0 battery module and 5KW-C0 power module →
Huawei LUNA2000 S1 series
5 to 21 kWh, 5-E1 / 7-E1 modules and 10KW-C1 power module →
View all Huawei battery storage →
Frequently asked questions about the Huawei LUTERRA S2
How much storage capacity does the LUTERRA S2 offer?
One tower holds up to four battery packs of 5 or 7 kWh each, i.e. a maximum of 28 kWh. For larger properties, Huawei has announced the coupling of several units.
Do I also need a Huawei inverter?
No. The hybrid inverter is already included in the LUTERRA S2. This is the most important difference from the LUNA2000 S0 and S1 batteries, which require a separate SUN2000 hybrid inverter.
Can I combine my LUNA2000 battery with the LUTERRA S2?
Huawei has not confirmed this so far. If you want to expand an existing LUNA2000, you should stay with your own series (S0 or S1; the two cannot be combined with each other). We will be happy to advise you.
Does the LUTERRA S2 have a backup power function?
Yes, according to Huawei a backup function is integrated, so a separate backup box is not required. Huawei has not yet published the exact backup power rating.
When will the LUTERRA S2 be available and how much does it cost?
Huawei is starting the European launch in November 2026. In Germany, the system is expected to be available from early 2027. There are no prices yet. Register your interest without obligation.
What warranty does Huawei provide for the LUTERRA S2?
Huawei has not yet published the warranty conditions for the LUTERRA S2. As soon as they are available, we will add them here. For comparison: for the LUNA2000-S1, up to 15 years apply in Europe with a permanent FusionSolar connection.