
SMA Sunny Tripower Hybrid X 8 – 8 kW hybrid inverter (STPH8-60)
Summary: The SMA Sunny Tripower Hybrid X 8 (STPH8-60) is a three-phase hybrid inverter with 8 kW rated AC power, three MPP trackers and integrated energy management. It is designed for PV systems of up to 12 kWp (STC) in private homes and connects approved high-voltage batteries from SMA and BYD directly. In the event of a power failure, the SPS socket supplies up to 3,680 W; with the optional SMA Backup, the whole house is supplied.
The new hybrid generation from SMA: the SMA Sunny Tripower Hybrid X 8 combines a three-phase PV inverter, battery connection and energy management in one device. With 8 kW rated AC power, three independent MPP trackers and a low PV input voltage from 90 V, it also suits roofs with several orientations and short strings.
As the integrated System Manager, the inverter controls generation, storage and consumption. The SMA Energy Planner provides the basic functions; the SMA Energy Maximizer (activation subject to a fee) optimises self-consumption and grid purchase, also on the basis of dynamic electricity tariffs. According to SMA, commissioning takes around five minutes via the SMA 360° App.
- 8 kW rated AC power, three-phase grid connection
- 3 independent MPP trackers, PV input voltage from 90 V
- Connection of approved high-voltage batteries (80–600 V, up to 50 A)
- Integrated energy management with SMA Energy Planner and optional SMA Energy Maximizer
- SPS emergency power socket 3,680 W, optional SMA Backup for the whole house
- Integrated: SMA ShadeFix, SMA ArcFix and surge protection AC type 2 / PV type 1+2

Product benefits
PV, battery and control in one device
The integrated System Manager coordinates up to 10 devices, including up to 5 inverters. Operation requires an energy meter approved by SMA: SMA Energy Meter, SMA Energy Meter CT or Sunny Home Manager 2.0.
Flexible roof planning
Three MPP trackers with 18 A each and a minimum input voltage of 90 V make planning easier for different roof areas, orientations and short strings. SMA ShadeFix supports yield optimisation in partial shading.
Choosing the right battery
Approved batteries are SMA Home Storage, SMA Storage M and BYD Battery-Box HVB, HVS+ and HVM+. According to SMA, up to 37 kWh of storage capacity can be integrated with SMA Home Storage or SMA Storage M. The firmware requirements in the SMA battery list must be observed.
Backup power as required
In the event of a grid failure, the integrated SPS socket supplies up to 3,680 W single-phase (manual switchover). Supplying the whole house with automatic switchover (typ. 1–2 s) requires the separately available SMA Backup.
Who is the SMA Sunny Tripower Hybrid X 8 suitable for?
- Private homes with a three-phase grid connection (230/400 V) and a PV system of up to 12 kWp
- Roofs with several orientations, dormers or short strings: three independent MPP trackers and a PV input voltage from 90 V
- New systems with battery storage and systems in which the battery is to be retrofitted later
- Households with a dynamic electricity tariff or an SMA eCharger that want to control generation, storage and consumption via the integrated energy management
- Systems that need backup power: SPS socket up to 3,680 W as standard, backup power for the whole house with the optional SMA Backup
Not suitable for single-phase house connections. Batteries that are not on the SMA compatibility list (e.g. BYD Battery-Box HVS or HVM without “+”) are not approved by SMA.
Features at a glance
- 8 kW rated AC power, three-phase grid connection
- 3 independent MPP trackers, PV input voltage from 90 V
- Connection of approved high-voltage batteries (80–600 V, up to 50 A)
- Integrated energy management with SMA Energy Planner and optional SMA Energy Maximizer
- SPS emergency power socket 3,680 W, optional SMA Backup for the whole house
- Integrated: SMA ShadeFix, SMA ArcFix and surge protection AC type 2 / PV type 1+2
Technical data
| Manufacturer | SMA Solar Technology |
|---|---|
| Series | Sunny Tripower Hybrid X |
| Type designation | STPH8-60 |
| Rated AC power | 8 kW (8000 VA max. apparent power) |
| Grid connection | 3-phase, 3-N-PE, 230/400 V, 50 Hz |
| Max. connectable PV power | 12 kWp (STC) |
| Independent MPP trackers | 3 (1 string each) |
| Max. PV input voltage | 1000 V |
| Min. PV input voltage / start input voltage | 90 V / 100 V |
| MPP voltage range at rated power | 160–850 V |
| Max. usable input current per MPPT | 18 A |
| Battery voltage range | 80–600 V; approved batteries only |
| Max. charge/discharge current | 50 A / 50 A |
| Max. usable charge/discharge power | 10000 W / 8000 W |
| Rated current at 230 V / max. output current | 11.6 A / 12.1 A |
| Max. / European efficiency | 98.3% / 97.1% |
| SPS output (emergency power socket) | 3680 W, 230 V, max. 16 A, manual switchover |
| Backup power for the whole house | optional with SMA Backup, automatic switchover typ. 1–2 s |
| Compatible batteries | SMA Home Storage, SMA Storage M, BYD Battery-Box HVB / HVS+ / HVM+ |
| Interfaces | 2 × Ethernet, WLAN, BAT-CAN; SMA Speedwire, SMA Modbus, SunSpec Modbus |
| Integrated System Manager | max. 10 devices, including up to 5 inverters |
| Protective functions | SMA ArcFix (AFCI), SMA ShadeFix, I-V array diagnostics; surge protection AC type 2 / PV type 1+2 |
| Noise emission, typical | 36 dB(A) |
| Degree of protection | IP65, for outdoor installation |
| Operating temperature range | −25 °C to +60 °C (with derating) |
| Dimensions (W × H × D) | 467 × 555 × 239 mm |
| Weight | max. 33.5 kg |
| Manufacturer's warranty | 5 years; 10 years after registration in accordance with SMA conditions; 15 years optional |
Compatible batteries according to SMA
| SMA Home Storage | 3.2–16.4 kWh; battery firmware 1.01.59.R or higher |
|---|---|
| SMA Storage M | 12.3–36.8 kWh; battery firmware 1.0.9.R or higher |
| BYD Battery-Box HVM+ | 8.3–22.1 kWh; battery firmware 1.36.0 or 1.37.0 |
| BYD Battery-Box HVS+ | 5.1–12.8 kWh; battery firmware 1.36.0 or 1.37.0 |
| BYD Battery-Box HVB | 5.9–29.6 kWh; battery firmware 1.36.0 or 1.37.0 |
Inverter firmware 3.17.90.R or higher is required. The maximum charging power of the STPH8-60 is 10,000 W; the discharging power is limited to 8,000 W. Source: SMA Technical Information “Approved batteries and information on connecting batteries” (STPH-Batteries-TI-en-13, version 1.3).
Scope of delivery
- 1 × SMA Sunny Tripower Hybrid X 8 (STPH8-60)
- Mounting bracket and 2 combination screws M6x14
- AC connector and AC connector for the SPS connection
- 3 pairs of DC connectors for PV and 1 pair of MC4 Evo 2 connectors for the battery cable
- WLAN antenna, cable gland for communication (Multi I/O), 2 RJ45 protective sleeves
- Documentation package with quick start poster and password label
Battery storage, SMA Backup, SMA Energy Meter, PV modules and installation services are not included with this single device. Scope of delivery according to the SMA operating manual.
Frequently asked questions about the SMA Sunny Tripower Hybrid X 8
Which batteries can I connect to the SMA Sunny Tripower Hybrid X 8?
According to SMA, SMA Home Storage, SMA Storage M and BYD Battery-Box HVB, HVS+ and HVM+ are approved. The battery must have the firmware stated in the SMA list, and the inverter must have at least firmware 3.17.90.R.
Can I operate the inverter without a battery at first?
Yes, operation as a pure PV inverter is possible. In its release notes, SMA specifies firmware 03.17.94.R as the minimum version for this. An approved battery can be added later.
Which energy meter is required?
Operation requires an energy meter approved by SMA at the grid connection point: SMA Energy Meter, SMA Energy Meter CT or Sunny Home Manager 2.0. The meter is not included in the scope of delivery.
How does the backup power work?
In the event of a power failure, the integrated SPS socket supplies up to 3,680 W single-phase; switching is done manually. To supply the whole house with automatic switchover (typically 1–2 seconds), the separately available SMA Backup is required.
How long does delivery take and how is the inverter shipped?
The current delivery time is shown on this page directly next to the price; at present it is expected to be 1 working day. The inverter is shipped as a GLS parcel (device weight max. 33.5 kg). The shipping costs are shown at checkout.
Can I collect the inverter in Weissach?
Yes, collection from our warehouse in 71287 Weissach (Im Bühl 39) is free of charge. After your purchase, please arrange a collection appointment by e-mail to kontakt@bm-distribution.de. Collection times are Monday to Friday from 9:00 a.m. to 2:00 p.m.
Manufacturer notes and planning
Technical values according to SMA datasheet STPHxx-60-DS-de-10, status 06/2026. Battery approval, firmware and installation requirements must be observed. Warranty extension only after registration and under the SMA warranty conditions.
Electrical connection, protection concept and commissioning by qualified specialists only. The permissible system combination and the requirements of the grid operator must be checked before installation.
SMA datasheet Sunny Tripower Hybrid X
SMA Technical Information: Approved batteries
Subject to technical changes. Images may be series-related; optional accessories are only included if expressly stated.
