SMA Sunny Tripower Hybrid X 5, 6, 8 and 10: the guide

Guide · SMA Sunny Tripower Hybrid X

The SMA Sunny Tripower Hybrid X is a three-phase hybrid inverter for residential homes. It connects the PV system, battery storage and household grid in a single device and comes with integrated cloud-based energy management.

In this guide we compare the four models Sunny Tripower Hybrid X 5, 6, 8 and 10: technical data from the SMA datasheet, compatible batteries, backup power options and which model suits which PV system.

Go to model comparisonAll SMA products

Key facts at a glance

Four power classesHybrid X 5, 6, 8 and 10 with 5,000 to 10,000 W rated power – all three-phase (3-N-PE) for 230 V / 400 V.
3 MPP trackers from 90 VThree independent MPP inputs, each with 18 A usable input current. The low PV input voltage of 90 V allows short strings.
Direct battery connectionBattery input 80 V to 600 V. Approved batteries are SMA Home Storage, SMA Storage M and the BYD Battery-Box HVB, HVS+ and HVM+.
Energy management includedSMA Energy Planner is always on board; SMA Energy Maximizer can be activated for a fee. Backup power via the SPS socket or the optional SMA Backup.

What is the Sunny Tripower Hybrid X?

A hybrid inverter converts the direct current from the solar modules into alternating current for the house and also charges and discharges a high-voltage battery. In the Sunny Tripower Hybrid X, a single device does all of this: PV input, battery input and three-phase grid connection share one enclosure.

SMA describes the Hybrid X as the central control unit of the home energy system. The series ranges from 5 to 15 kVA; in our shop we offer models 5, 6, 8 and 10. According to SMA, commissioning takes around 5 minutes via the SMA 360° App. An integrated System Manager manages up to 10 devices, of which up to 5 can be inverters.

All four models share the same enclosure: 467 × 555 × 239 mm, max. 33.5 kg, IP65 protection for indoor or outdoor installation.

SMA Sunny Tripower Hybrid X three-phase hybrid inverter
The SMA Sunny Tripower Hybrid X – one enclosure for all four power classes.

The four models compared

The models differ mainly in AC power, maximum connectable PV power and battery discharge power. All values are taken from the SMA datasheet (as of 06/2026).

Hybrid X 5 Hybrid X 6 Hybrid X 8 Hybrid X 10
Type designation STPH5-60 STPH6-60 STPH8-60 STPH10-60
Rated AC power 5,000 W 6,000 W 8,000 W 10,000 W
Max. apparent power 5,000 VA 6,000 VA 8,000 VA 10,000 VA
Max. connectable PV power (STC) 7,500 Wp 9,000 Wp 12,000 Wp 15,000 Wp
MPP voltage range at rated power 100 V – 850 V 120 V – 850 V 160 V – 850 V 200 V – 850 V
Max. usable battery discharge power 5,000 W 6,000 W 8,000 W 10,000 W
Max. usable battery charge power 10,000 W 10,000 W 10,000 W 10,000 W
Rated current at 230 V 7.2 A 8.7 A 11.6 A 14.5 A
Max. efficiency 98.1% 98.2% 98.3% 98.3%
European efficiency 96.0% 96.5% 97.1% 97.4%
In our shop View Hybrid X 5 View Hybrid X 6 View Hybrid X 8 View Hybrid X 10

Values at nominal conditions according to the manufacturer. The maximum connectable PV power is an upper limit – your installer will take care of the exact string design.

Data shared by all four models

Feature Sunny Tripower Hybrid X 5 / 6 / 8 / 10
PV input voltage min. 90 V, max. 1,000 V, start 100 V, rated 650 V
MPP voltage range 90 V – 850 V
MPP trackers 3 independent inputs, 1 string each
Current per MPPT input max. 18 A usable, max. 24 A short-circuit current
Battery input 80 V – 600 V, max. 50 A charge and discharge current
Grid connection 3 / 3-N-PE, 230 V / 400 V, 50 Hz
Dimensions (W / H / D) 467 / 555 / 239 mm
Weight max. 33.5 kg
Degree of protection IP65 / outdoor
Operating temperature −25 °C to +60 °C (with derating)
Noise emission, typical 36 dB(A)
Self-consumption (night) < 18 W
Interfaces Ethernet (2 ports), BAT-CAN, WLAN
Protective functions AFCI arc-fault protection, all-pole sensitive residual current monitoring, surge protection AC type 2 / PV type 1+2
Diagnostics SMA ShadeFix, SMA ArcFix, I-V curve diagnostics

Which model suits whom?

The key factors are the size of the PV system and the power the battery should deliver to the house. The following guidance is based on the maximum connectable PV power according to the datasheet.

Hybrid X 5For PV systems up to 7.5 kWp. Suits smaller roofs and households with moderate consumption. Battery discharge power up to 5 kW. View product →
Hybrid X 6For PV systems up to 9 kWp. A little more headroom in AC and discharge power (6 kW each) than the X 5. View product →
Hybrid X 8For PV systems up to 12 kWp. A good choice if larger loads such as a heat pump or wallbox are to be supplied from the battery with up to 8 kW in the evening. View product →
Hybrid X 10For PV systems up to 15 kWp. The most powerful model in our shop with 10 kW AC and discharge power for large roofs and high consumption. View product →

A note on system design: the larger the model, the higher the MPP voltage from which full power is available (100 V for the X 5 up to 200 V for the X 10). With very short strings, a smaller model may therefore be the better fit. Your installer designs the system based on the roof, modules and consumption.

SMA also offers the Hybrid X 12 and X 15 in the same series. If you need a larger model, please get in touch.

Which batteries are compatible?

SMA approves the following batteries for the Sunny Tripower Hybrid X 5 to 15 (Technical Information “STPH-Batteries-TI-de-13”). The column “Approved types” lists the type designations according to SMA.

Battery Approved types Manufacturer
SMA Home Storage 3.2 to 16.4 SMA Solar Technology AG
SMA Storage M 12.3 to 36.8 SMA Solar Technology AG
BYD Battery-Box HVM+ 8.3 to 22.1 BYD
BYD Battery-Box HVS+ 5.1 to 12.8 BYD
BYD Battery-Box HVB 5.9 to 29.6 BYD

According to the datasheet, up to 37 kWh of storage capacity can be integrated with SMA Home Storage or SMA Storage M. For SMA Home Storage, SMA requires at least inverter firmware 3.17.90.R; for the BYD batteries, battery firmware versions 1.36.0 and 1.37.0 have been tested and approved.

You will find compatible batteries in our categories SMA Home Storage and BYD.

Energy management and energy meter

Energy management is integrated in the Hybrid X and cloud-based. SMA Energy Planner offers basic functions with manual planning that are always available. SMA Energy Maximizer is activated for a fee: using self-learning algorithms and forecast-based control, it optimises the use of your own solar power and grid consumption, also on the basis of dynamic electricity tariffs.

An energy meter approved by SMA is required for operation: SMA Energy Meter, SMA Energy Meter CT or Sunny Home Manager 2.0. The meter is not included in the inverter's scope of delivery.

Ethernet, WLAN and BAT-CAN are available for communication, along with SMA Speedwire, SMA Modbus and SunSpec Modbus. According to SMA, the device complies with the EU RED cybersecurity regulation (EN 18031-1) and ETSI EN 303 645, among others; data is hosted in the EU.

Backup power: SPS socket or SMA Backup

In the event of a power failure, there are two ways to keep using power from PV and battery:

SPS output (integrated) SMA Backup (accessory)
What is supplied? Individual loads at one socket The entire house, three-phase
Power 3,680 W / 3,680 VA at 230 V, max. 16 A depends on the inverter model
Switchover manual automatic, typ. 1 s to 2 s
Types integrated in the inverter BU-STPH-3P63K, BU-STPH-3P63B, BU-STPH-4P63K, BU-STPH-4P63B

According to the manufacturer, up to three hybrid inverters can be operated in parallel with SMA Backup. Your electrician will determine on site which variant suits your meter cabinet.

Frequently asked questions

Is the Sunny Tripower Hybrid X single-phase or three-phase?

All models are three-phase (3-N-PE) and designed for 230 V / 400 V grids. The series is not intended for single-phase house connections.

Do I really need an energy meter?

Yes. SMA requires an approved energy meter: SMA Energy Meter, SMA Energy Meter CT or Sunny Home Manager 2.0.

How long is the warranty?

According to the datasheet, 5 years of warranty are standard. 10 years are available after registering the device via the SMA product registration (my.sma-service.com) under the terms of the SMA factory warranty. 15 years are available as an option.

Can I combine several inverters?

Yes. According to SMA, up to 5 hybrid inverters can be operated in parallel. The integrated System Manager manages up to 10 devices, of which up to 5 can be inverters. With SMA Backup, up to three hybrid inverters are possible.

Where can the inverter be installed?

The Hybrid X is wall-mounted. With IP65 it is suitable for indoor and outdoor use. The operating temperature range is −25 °C to +60 °C (with derating), the maximum operating altitude is 3,000 m.

Does the zero VAT rate apply to the Hybrid X?

For private customers in Germany, 0% VAT can apply when it is purchased as part of a PV system, provided the requirements of Section 12 (3) of the German VAT Act (UStG) are met. In our shop, you select the matching tax variant for this.

Find the right Hybrid X

You will find all four models, compatible batteries and further SMA accessories in our shop. Tell us your PV power, storage requirements and consumption – we will help you choose.

Note: this guide does not replace planning by a qualified installer. Clarify system size, string design, battery and backup solution before purchase using the current manufacturer documentation.

All information without guarantee. Subject to technical changes and errors. The current SMA manufacturer documentation is authoritative.

Back to blog