Sungrow PowerHarbor – all information on the new all-in-one storage system

New for 2026 · Preliminary information

Sungrow PowerHarbor: hybrid inverter, storage up to 120 kWh and backup power in one system

With PowerHarbor, Sungrow is launching its new all-in-one home storage system. The three-phase hybrid inverter sits directly on the stackable battery modules, complemented by a compact backup solution and AI-supported energy management. The system was presented in June 2026 at Intersolar Europe in Munich. Here we summarise what has been confirmed so far, how PowerHarbor differs from the proven Sungrow SBR and SBH batteries and how you can register your interest in the system with B&M Distribution.

Send a non-binding enquiry now
Sungrow PowerHarbor all-in-one storage system with hybrid inverter and stacked battery modules

What is the Sungrow PowerHarbor?

PowerHarbor is Sungrow's answer to the trend towards complete systems: inverter, battery, backup power and energy management come from a single source and are built as one tower. The inverters (series SH…TA) cover 10 to 30 kW and operate three-phase. Underneath, the battery modules SMD060, SMD090 and SMD100 (6, 9 and 10 kWh) are stacked on top of each other without external cables. Up to six modules fit on one inverter, i.e. up to 60 kWh per tower. With two systems in parallel, up to 120 kWh are possible according to Sungrow.

With the previous Sungrow solutions with SBR or SBH , on the other hand, you combine a separate hybrid inverter (e.g. SH-RT) with its own battery tower. A special feature of PowerHarbor: inverter and battery can also be installed separately if required, for example when retrofitting an existing PV system.

The highlights at a glance

Freely combinable modules6, 9 and 10 kWh modules can be mixed. According to Sungrow, this results in 83 capacity variants per tower. Each module has its own battery optimiser, so modules of a different size can also be added later.
Up to 160% PV charging powerUp to 1.6 times the inverter's rated power can be charged directly from the PV system into the battery. At 0.66P, the full battery can be discharged again in around 1.5 hours, ideal for dynamic tariffs and virtual power plants.
EnergyBridge: mini backupThe backup power unit combines grid switch, circuit breaker, meter, bypass and current transformer in one DIN-rail device for the distribution board. Switchover time according to the datasheet: 0 ms.
iHomeManager Mini with AIPlugs directly into the inverter as standard and plans charging and discharging based on weather forecast, consumption and electricity price. Integration of Shelly devices and Modbus (e.g. heating rod); EEBUS for heat pumps is planned.
Unbalanced load up to 150%Individual phases can be loaded more heavily, for example when heat pump, induction hob and wallbox are running at the same time (150% at 10–12 kW, 120% for the SH15TA).
Flat, robust, safeOnly 25.5 cm deep, IP66, C5 corrosion protection, for indoor and outdoor use. AFCI arc fault protection, cell monitoring, active fire suppression in the pack and UL-9540A/B certification.

Technical data (preliminary information)

As of November 2026. The values for the inverters are taken from the official Sungrow datasheet SH10/12/15TA (EU, version 1), supplemented by manufacturer information from the press releases. We do not yet have a final German datasheet for the larger models (17–30 kW). Changes are possible before market launch.

Feature Sungrow PowerHarbor
System type All-in-one: hybrid inverter, modular battery storage, backup (EnergyBridge), AI energy management (iHomeManager Mini)
Inverter (three-phase) 10 to 30 kW: SH10TA, SH12TA, SH15TA as well as SH17TA, SH20TA, SH22TA, SH25TA, SH30TA
PV input (SH10–15TA) max. 1000 V, start-up voltage 100 V, MPP range 100–950 V, 3 MPP trackers of 20 A each, max. PV power 20 / 24 / 30 kWp
Efficiency (SH10–15TA) max. 98.1%, European 97.2%
Battery modules SMD060 / SMD090 / SMD100: 6 / 9 / 10 kWh nominal (5.7 / 8.7 / 9.7 kWh usable), LiFePO4 with 314 Ah cells, 10,000 cycles
Capacity 1 to 6 modules per inverter, i.e. up to 60 kWh per tower; with 2 systems in parallel up to 120 kWh
Charging/discharging power per module Rated 3.1/3.0 kW (SMD060), 4.66/4.5 kW (SMD090), 5.18/5.0 kW (SMD100)
Backup power Three-phase, switchover time 0 ms, off-grid operation with 10 / 12 / 15 kW rated power (peak 15 / 18 / 22.5 kVA for 10 s) for the SH10–15TA
Protection class / cooling IP66, natural convection without fan (up to 15 kW), typically 30 dB(A)
Dimensions / weight Inverter 788 × 375 × 255 mm, ≤ 41 kg; battery module 788 × 280 × 255 mm, 58 / 76 / 79 kg
Operating temperature Inverter −25 to 60 °C (derating from 45 °C), battery −20 to 50 °C
Communication RS485, WiFi, Ethernet, CAN; monitoring via iSolarCloud
Warranty Not yet published for Germany
Price Not yet known, on request

Download datasheet SH10/12/15TA (PDF, English) →

Comparison: SBR and SBH vs. PowerHarbor

SBR series SBH series PowerHarbor
Design Battery storage, separate hybrid inverter required Battery storage, separate hybrid inverter required All-in-one with integrated inverter
Capacity (in our shop) up to 25.6 kWh per tower up to 40 kWh per tower up to 60 kWh per tower, 120 kWh with 2 systems
Module sizes one module size per series one module size per series 6 / 9 / 10 kWh freely mixable
Backup via inverter and backup components via inverter and backup components EnergyBridge in the distribution board
Availability available in our shop available in our shop expected early 2027, pre-registration possible

Important: Sungrow has not yet confirmed whether PowerHarbor modules can be combined with existing SBR or SBH batteries. Compatibility with batteries from other manufacturers is also not intended.

Who is the PowerHarbor suitable for?

PowerHarbor is of interest if you …
  • are planning a larger PV system with high consumption, for example with a heat pump and electric car,
  • need a lot of storage (up to 120 kWh) for a house or smaller business,
  • want inverter, battery and backup power compactly from a single source,
  • want to use dynamic electricity tariffs or virtual power plants.
SBR/SBH is the better choice if you …
  • already have a Sungrow hybrid inverter,
  • want to expand an existing SBR or SBH battery,
  • need your battery now and do not want to wait until 2027,
  • value final datasheets, warranty conditions and prices.

Availability at B&M Distribution

Sungrow presented PowerHarbor at Intersolar Europe on 23 June 2026. The system has been available in the Netherlands, Belgium and Luxembourg since 22 September 2026. For Germany, specialist dealers expect sales to start in early 2027. There is no official date or German pricing yet.

Would you like to plan PowerHarbor into your project? Write to us. We will register your interest without obligation and get back to you as soon as the datasheet, prices and delivery dates are confirmed.

Enquire now

Available right now: Sungrow SBR and SBH

View all Sungrow products →

Frequently asked questions about the Sungrow PowerHarbor

How much storage capacity does the PowerHarbor offer?

One to six modules of 6, 9 or 10 kWh fit on one inverter, i.e. up to 60 kWh. With two systems operated in parallel, up to 120 kWh are possible according to Sungrow.

Do I also need a Sungrow inverter?

No. The three-phase hybrid inverter (10 to 30 kW) is part of the system. This is the most important difference from the SBR and SBH batteries, which require a separate hybrid inverter.

Can I integrate PowerHarbor into an existing PV system?

According to Sungrow, yes: inverter and battery can also be installed separately. Thanks to the 100 V start-up voltage and wide MPP range, existing strings can often continue to be used. Compatibility must be checked in each individual case using the current and voltage values. We will be happy to advise you.

Does the PowerHarbor have a backup power function?

Yes. Together with the EnergyBridge, the system continues to supply the house in the event of a power failure, with a switchover time of 0 ms according to the datasheet. Which loads keep running depends on the installation and the available power.

When will the PowerHarbor be available and how much does it cost?

It has been available in the Benelux countries since September 2026. In Germany, the launch is expected in early 2027. There are no prices yet. Register your interest without obligation.

What warranty does Sungrow provide for the PowerHarbor?

Sungrow has not yet published the warranty conditions for Germany. As soon as they are available, we will add them here. According to the datasheet, the cells are designed for 10,000 cycles.

Note & sources: All information on PowerHarbor is preliminary information (as of November 2026) based on manufacturer information and trade reports. It may change before the market launch in Germany and does not replace the official datasheet. Sources: Sungrow – PowerHarbor product page, Sungrow – Launch Intersolar 2026, Sungrow – Market launch Benelux, Sungrow datasheet SH10/12/15TA, Solarhandel24.