
Sungrow SH20T – 20 kW hybrid inverter with backup
The Sungrow SH20T combines 20 kW rated AC power, direct high-voltage battery connection and an integrated backup switchover. The recommendation of up to 40 kWp PV array power offers planning scope for large roof systems, provided all electrical input limits are observed.
The integrated 63 A bypass and the fast switchover at the backup output support a coordinated backup power solution. The combination of three MPP trackers, five string connections and up to 50 A battery charge/discharge current offers the specialist installer several options for a needs-based system design.
- 20 kW rated AC power, three-phase grid connection
- Up to 40 kWp recommended PV array power according to the datasheet
- 3 MPP trackers with 2 / 2 / 1 string connections
- High-voltage battery voltage range of 100–700 V
- Up to 50 A charge and discharge current, depending on the battery
- Integrated 63 A bypass and backup switchover in under 10 ms

Product benefits
Covering more complex roofs too
Three independent MPP trackers help with the electrical division of differently oriented array surfaces. For the SH20T, Sungrow specifies up to 40 kWp recommended PV input power; current and voltage limits remain binding.
Store energy flexibly
The battery connection operates in the voltage range of 100 to 700 V. Up to 50 A charge/discharge current is possible according to the datasheet; the actually usable power depends in particular on the approved battery and its operating point.
Plan backup as an overall system
The 63 A bypass and switchover in under 10 ms support the supply of appropriately connected loads. Backup power and runtime depend on the battery, state of charge and loads. Backup does not mean unlimited supply of all loads.
Network system data
WLAN, Ethernet, RS485 and CAN support monitoring and system communication. The IP65 housing allows installation at a location suitable according to the manual; installation must be carried out by a qualified electrician.
Features at a glance
- 20 kW rated AC power, three-phase grid connection
- Up to 40 kWp recommended PV array power according to the datasheet
- 3 MPP trackers with 2 / 2 / 1 string connections
- High-voltage battery voltage range of 100–700 V
- Up to 50 A charge and discharge current, depending on the battery
- Integrated 63 A bypass and backup switchover in under 10 ms
Technical data
| Manufacturer | Sungrow |
|---|---|
| Model | SH20T |
| Inverter type | Three-phase hybrid inverter |
| Rated AC power | 20 kW |
| Recommended max. PV array power | 40 kWp |
| Max. PV input voltage | 1.000 V |
| MPP operating voltage range | 150–950 V; observe the full-load range according to the manual |
| Independent MPP trackers | 3 |
| PV strings per MPPT | 2 / 2 / 1 |
| Battery voltage range | 100–700 V |
| Max. charging/discharging current | 50 A / 50 A, depending on the connected battery |
| Rated backup power without grid | 20 kW / 20 kVA, with suitable PV/battery supply |
| Backup switchover time | < 10 ms according to the datasheet |
| Integrated bypass | 63 A |
| Communication | RS485, WLAN, Ethernet, CAN |
| Surge protection | DC type II / AC type II |
| Protection class | IP65 |
| Dimensions (W × H × D) | 620 × 480 × 245 mm |
| Weight | 38 kg |
Scope of delivery
- 1 × Sungrow SH20T hybrid inverter
- 1 × three-phase smart meter according to the existing product configuration
- Mounting and connection accessories according to the manufacturer's packing list
Battery storage, PV modules and installation services are not included. Meter variant and other accessories depend on the country version offered.
Manufacturer information and planning
Information according to the Sungrow SH15/20/25T datasheet, version 3. Check battery approval, firmware, electrical limits and connection requirements before planning. Power values in backup mode require a sufficient PV and battery supply.
Electrical connection, protection concept and commissioning exclusively by qualified specialists. The permissible system combination and the requirements of the grid operator must be checked before installation.
Subject to technical changes. Images may be series-related; optional accessories are only included if expressly stated.
