
Heidelberg Amperfied Wallbox Energy Control 11 kW incl. 5m Cable - WALTHER-WERKE basicEVO PRO EDITION
WALTHER-WERKE WALLBOX BASICEVO PRO 11 KW INCL. 5M CABLE, shutdown according to §14a EnWG possible. – The WALTHER-WERKE wallbox basicEVO PRO is the proven "Energy Control" wallbox from Heidelberg Amperfied.
The WALTHER-WERKE basicEVO PRO 11 kW is the first wallbox from Heidelberg to offer local and dynamic load management. The charging current can be distributed across up to 16 wallboxes, so up to 16 hybrid or electric cars can be charged at the same time. The available current is automatically allocated to the individual wallboxes as required. This process is completely automatic. Each vehicle can be charged with up to 11 kW. Once a vehicle is fully charged, it continues to be supplied with sufficient power if required, e.g. to keep the air conditioning or auxiliary heating running. When current becomes available, it is automatically distributed to the batteries of the other electric cars. The rated current of the Heidelberg Wallbox Energy Control can be set from 6 to 16 amperes. Of course, smart interaction between your photovoltaic system and the Heidelberg Energy Control is ensured. You can connect the wallbox to your home energy management system (HEMS) and thus use your self-produced electricity, e.g. the surplus electricity from the photovoltaic system, to charge your electric car. The system only feeds as much solar power into the wallbox as is currently available. This enables consumption-optimised use of your self-produced electricity. If you integrate the Heidelberg Wallbox Energy Control into your HEMS, you can also control the charging system via the internet. Depending on the manufacturer, various apps may be available for monitoring charging processes or cost management. In addition, the wallbox can be protected against unauthorised charging using an RFID reader or a key switch. Please note that these are not included in the scope of delivery. The front lighting shows you the current status of the Heidelberg Wallbox Energy Control. The wallbox with load management from Heidelberg impresses with its very easy and convenient handling. The high-performance system guarantees fast charging of your electric vehicle. A safe and intelligent socket with an elegant design for your electric car. The already integrated residual current detection keeps installation costs to a minimum. The WALTHER-WERKE wallbox basicEVO PRO 11 kW is the right charging solution for garages, apartment buildings as well as company and hotel car parks.
- Smart charging system for up to 16 electric cars
- Local, dynamic load management from two networked wallboxes
- A maximum of 16 wallboxes can be networked
- Modbus RTU for external load management control, e.g. via HEMS
- Installation of an external locking device is possible
- Connection to 230 volts (single-phase) or 400 volts (three-phase)
- Adjustable rated current from 6 to 16 amperes
- Adjustable charging power up to a maximum of 11kW
- Supports all electric and hybrid vehicles equipped with a Type 2 charging socket.

Product features
Expansion
Local, dynamic load management from two networked wallboxes
Communication
Modbus RTU for external load management control, e.g. via HEMS
Mounting
Installation of an external locking device is possible
Connection
Connection to 230 volts (single-phase) or 400 volts (three-phase)
Technical data
| Integrated residual current detection | DC 6mA |
|---|---|
| Cable length | 5,0 m |
| Plug-and-play solution | easy to install by a qualified electrician or an installation service. |
Subject to changes and errors, images similar.
