
GoodWe GW10KN-ET PLUS+ – 10 kW hybrid inverter, 16 A
The GoodWe GW10KN-ET PLUS+ combines 10 kW rated AC power with 16 A maximum input current per MPP tracker. This makes it a powerful hybrid hub for three-phase PV systems whose solar power is to be used immediately or stored in an approved high-voltage battery.
PV generation, battery charging and consumption can be brought together in one system. The battery voltage range of 180 to 600 V offers flexibility in selecting approved high-voltage batteries. For backup operation and self-consumption control, battery, measurement and installation must be compatible with each other.
- 10 kW rated AC power for three-phase grid connection
- 16 A maximum PV input current per MPP tracker
- 2 independent MPP trackers for PV design
- High-voltage battery connection for approved batteries
- Backup switchover in under 10 ms according to the manufacturer
- Fanless housing with protection class IP66

Product benefits
Using solar power later
A compatible high-voltage battery absorbs suitable PV surpluses and makes energy available later. How high self-consumption turns out depends on the consumption profile, array size and battery size.
Selecting the right version
This is the GW10KN-ET model with 16 A maximum input current per MPP tracker. Current and voltage limits must be checked for each module and string combination; this value is not an input voltage.
Fast backup switchover
According to the manufacturer, the integrated backup function switches over in less than 10 ms. Usable power and runtime depend on the connected battery, state of charge and the intended loads. Not every load is suitable without restriction.
Quiet operation without a fan
The ET PLUS+ series works with natural convection. The fanless design and the IP66 housing support a compact installation; installation location and clearances must comply with the manual.
Features at a glance
- 10 kW rated AC power for three-phase grid connection
- 16 A maximum PV input current per MPP tracker
- 2 independent MPP trackers for PV design
- High-voltage battery connection for approved batteries
- Backup switchover in under 10 ms according to the manufacturer
- Fanless housing with protection class IP66
Technical data
| Manufacturer | GoodWe |
|---|---|
| Model | GW10KN-ET |
| Series / version | ET PLUS+ / 16 A |
| Inverter type | Three-phase hybrid inverter |
| Rated AC power | 10 kW |
| MPP trackers | 2 |
| Max. input current per MPPT | 16 A |
| Battery voltage range | 180–600 V |
| Battery compatibility | Only according to the current GoodWe approval list |
| Backup switchover time | < 10 ms according to the manufacturer |
| Cooling | Natural convection, fanless |
| Protection class | IP66 |
Scope of delivery
- 1 × GoodWe GW10KN-ET ET PLUS+ hybrid inverter
Battery and PV modules are not included. The measuring and communication accessories shown in the product images depend on the configuration; the selected version and the manufacturer's packing list are authoritative.
Manufacturer information and planning
Information according to GoodWe for the ET PLUS+ 16 A version. Not to be equated with ET G2 or another current variant. Check approved batteries, country approval and firmware version before system planning.
Electrical connection, protection concept and commissioning exclusively by qualified specialists. The permissible system combination and the requirements of the grid operator must be checked before installation.
GoodWe manufacturer information ET PLUS+
Subject to technical changes. Images may be series-related; optional accessories are only included if expressly stated.
