
Fronius Ohmpilot 9.0-3 – consumption controller / heating element controller
The Fronius Ohmpilot 9.0-3 is a consumption controller that uses surplus PV power for hot water preparation . Thanks to continuous control from 0 to 9 kW the solar surplus is efficiently passed on to a heat source in the household – instead of feeding it into the grid cheaply.
First and foremost, the Ohmpilot intelligently controls heating elements in boilers and buffer tanks . Other applications include infrared heating or a towel dryer. In a detached house with average hot water consumption in Central Europe, most of the hot water demand from March to October can typically be covered by solar power.
- Continuous control from 0 to 9 kW (single-phase 3 kW / three-phase 9 kW)
- Compatible with all Fronius inverters
- Easy commissioning via its own web interface and connection via WLAN

The advantages at a glance
More self-consumption
Increases the self-consumption rate to up to 100% – the PV surplus ends up in the hot water tank instead of the grid.
Continuous PWM control
Pulse width modulation from 0 to 9 kW, clean and low-interference control with THDi < 3%.
Protects the heating system
Extends the service life of the primary heat source, as it can largely pause during the summer months. Can be combined with other heat sources such as heat pumps.
Legionella protection & zero feed-in
Integrated protection against legionella; dynamic power limitation also enables systems with zero feed-in.
Requirements
- Fronius inverter with Fronius Datamanager 2.0 (integrated as standard in Fronius Symo, Symo Hybrid, Primo, Galvo and Eco, otherwise retrofittable)
- Fronius Smart Meter at the grid connection point, e.g. Fronius Smart Meter IP or Fronius TS65A-3 Smart Meter
- Recommended: PT1000 temperature sensor – only with this can the minimum and target hot water temperature be set and the temperature displayed in Fronius Solar.web
- With three-phase heating elements, the neutral conductor must be connected to the input voltage and to the heating element
Technical data
| Control range | continuously 0–9 kW |
|---|---|
| Max. output power | single-phase 3 kW / three-phase 9 kW |
| Input voltage | 230 V / 3 × 230 V |
| Max. input current | 16 A / 3 × 16 A |
| AC output current | 13 A / 3 × 13 A |
| Frequency | 50 Hz |
| THDi | < 3 % |
| Type of power control | Pulse width modulation (PWM) |
| Dimensions (H × W × D) | 350 × 280 × 110 mm |
| Weight | 3,9 kg |
| Protection class | IP54 |
| Mounting | Wall mounting |
| Ambient temperature | 0 – 40 °C |
| Permissible humidity | 0 – 99%, non-condensing |
| Certificates and standards | CE, EN 61000-6-2, EN 61000-6-3, EN 61000-3-2, EN 61000-3-3, EN 300 328 |
Downloads
Fronius Ohmpilot 9.0-3 datasheet (DE)
Fronius Ohmpilot 9.0-3 EU declaration of conformity
Subject to changes and errors, images similar.
