
BYD Power-Box TH10K Hybrid Inverter 10 kW
The BYD Power-Box TH10K is a three-phase hybrid inverter with 10 kW rated AC power for photovoltaic systems with battery storage. It converts the solar power from your PV modules, supplies your household, charges the BYD Battery-Box and feeds surplus power into the grid – all in one device. With a maximum efficiency of 98,2 % it gets the most out of your system.
The Power-Box TH10K is optimally matched to the high-voltage batteries BYD Battery-Box HVE, HVB, HVS+ and HVM+ (battery voltage 160 – 600 V). In the event of a power cut, it switches to backup power in less than 10 ms and briefly delivers up to 150 % peak power – so even devices with a high inrush current keep running. Thanks to 100 % unbalanced load capability each phase can be loaded independently.
- 10 kW rated AC power, three-phase (11,000 VA max. apparent power)
- Up to 15,000 Wp PV input power, 2 MPP trackers, max. 1,000 V
- Max. efficiency 98.2 %, European efficiency 97.5 %
- Backup power with switchover time < 10 ms and 150 % peak power (60 s)
- 100 % three-phase unbalanced load
- Integrated arc-fault protection (AFCI), Type II surge protection DC & AC
- Protection class IP66, operation from −25 °C to +60 °C
- Monitoring, remote diagnostics and OTA updates via WiFi/Ethernet and the BYD app



PV input
Battery
AC grid
Backup output
Efficiency
General
Product benefits
Intelligent energy management
Two MPP trackers with up to 18 A input current are designed for modern, high-performance PV modules. With up to 15,000 Wp of PV power and an MPPT efficiency of over 99.9 %, every kilowatt hour is put to use.
Powerful backup power
If the grid fails, the Power-Box takes over the supply in less than 10 ms. The backup output delivers 10 kW continuous power and 15,000 VA peak power for 60 seconds – with a clean sine wave (THDv ≤ 2 %).
100 % unbalanced load
Each of the three phases can be loaded independently up to full phase power. Ideal for households with many single-phase loads.
Robust and safe
Integrated arc-fault circuit interrupter (AFCI), Type II surge protection on the DC and AC side, residual current and reverse polarity protection, and protection class IP66 for indoor and outdoor installation.
Perfect with the BYD Battery-Box
Charge and discharge power of up to 15,000 W at 25 A / 25 A – matched to the BYD high-voltage batteries HVE, HVB, HVS+ and HVM+. Battery and inverter from a single source.
Smart monitoring
24/7 online monitoring, intelligent remote diagnostics and over-the-air firmware updates via WiFi/Ethernet and the BYD app. Communication with the battery via CAN/RS485.
Versatile use
The Power-Box TH10K is suitable for new installations as well as for retrofitting a battery storage system in detached houses, apartment buildings and small businesses. It supports grid-parallel operation with self-consumption optimisation and backup operation, and is certified to VDE-AR-N 4105 and EN 50549-1 for grid connection in Germany and Austria (TOR Type A).
Features at a glance
- Rated AC power: 10 kW
- max. PV power: 15,000 Wp
- max. efficiency: 98.2 %
- Backup switchover: < 10 ms
- Manufacturer: BYD
- Model: Power-Box TH10K
- Product type: three-phase hybrid inverter (transformerless)
- Max. PV input power: 15,000 Wp
Technical data
| Rated AC power | 10 kW |
|---|---|
| max. PV power | 15.000 Wp |
| max. efficiency | 98,2 % |
| Backup switchover | < 10 ms |
| Manufacturer | BYD |
| Model | Power-Box TH10K |
| Product type | Three-phase hybrid inverter (transformerless) |
| Max. PV input power | 15.000 Wp |
| Max. input voltage | 1.000 V |
| Start-up voltage / rated voltage | 180 V / 620 V |
| MPPT voltage range | 160 – 950 V |
| Number of MPP trackers / strings per MPPT | 2 / 1/1 |
| Max. input current per MPPT | 18 A |
| Compatible batteries | BYD Battery-Box HVE / HVB / HVS+ / HVM+ |
| Battery voltage | 160 – 600 V |
| Max. charging/discharging current | 25 A / 25 A |
| Max. charge/discharge power | 15.000 W / 15.000 W |
| Rated AC power | 10.000 W |
| Max. apparent power | 11.000 VA |
| Rated current / max. output current | 15,2 A / 14,5 A / 16,7 A / 16,0 A |
| Grid connection | 3/N/PE, 220/380 V or 230/400 V, 50/60 Hz |
| Power factor | 0.8 leading – 0.8 lagging |
| THDi | ≤ 3 % |
| Rated backup power | 10.000 W |
| Peak backup power | 15.000 VA, 60 s |
| Switchover time | < 10 ms |
| THDv | ≤ 2 % |
| Max. / European efficiency | 98,2 % / 97,5 % |
| MPPT efficiency | > 99,9 % |
| protective functions | Anti-islanding detection, residual current, PV reverse polarity, short-circuit and battery reverse polarity protection, AFCI, SPD Type II DC/AC |
| Operating temperature | −25 °C to +60 °C |
| Relative humidity | 0 – 100 % |
| Max. installation altitude | 4,000 m (derating above 3,000 m) |
| Cooling | Natural convection |
| Dimensions (H × W × D) | 537 × 577 × 206 mm |
| Weight | 26 kg |
| Display | LED + app |
| Communication | WiFi / Ethernet, RS485, CAN |
| Protection class | IP66 |
| Grid connection standards | VDE-AR-N 4105, EN 50549-1, TOR Type A, CEI 0-21, C10/11, AS4777.2 |
| Safety / EMC | IEC 62109-1/-2, IEC 61000-6/-3, IEC 62116, IEC 61727, IEC 62477 |
Scope of delivery
All data according to the manufacturer (BYD datasheet Power-Box TH5/6/8/10/12/15K). Current values at 220/380 V or 230/400 V. Subject to change and errors; images similar.
- 1 × BYD Power-Box TH10K hybrid inverter
- Mounting accessories and documentation according to the manufacturer
Subject to changes and errors, images similar.
