
Anker SOLIX Smart Meter Gen 2 (Three-Phase)
Anker SOLIX Smart Meter Gen 2 – three-phase energy meter
The Anker SOLIX Smart Meter Gen 2 (three-phase) records voltage, current and power in the household in real time. Based on the measurement data, a compatible Anker SOLIX storage system can adjust its output within about 3 seconds to current energy demand.
- Three-phase energy meter for home grids with 230/400 V
- Maximum measured value of 120 A per channel
- Accuracy class 1
- Current measurement accuracy ±1% at 1 to 120 A
- Separate grid and PV/ESS monitoring
- Communication via Bluetooth, 2.4 GHz WLAN and RS485
- Support for Modbus TCP
- Tool-free Weidmüller SNAP-IN connections
- Mounting on a 35 mm DIN rail
- Only 19 mm wide




The dual measuring point concept enables separate monitoring of the grid connection point and a photovoltaic or energy storage circuit. This allows energy flows to be clearly displayed and existing PV systems to be included in energy management.
With only 19 mm width the smart meter takes up little space in the distribution board. Data is transmitted via 2.4 GHz WLAN, Bluetooth or RS485. In addition, Modbus TCP and TCP/IP transparent protocols are supported for local integration.
3-phaseMeasurement for three-phase home grids
120 AMaximum measured value per channel
approx. 3 sec.Fast adjustment of compatible Solarbanks
19 mmCompact width for the DIN rail
Record energy flows preciselyThe three-phase smart meter measures power demand and provides the data for energy management.
Product benefits
Real-time grid monitoring
Current measured values enable needs-based control of compatible Anker SOLIX storage systems.
Dual-circuit monitoring
Two CT connections allow separate recording of the grid connection and an additional PV or storage circuit.
Compact housing
With a width of 19 mm, the energy meter takes up very little space on the 35 mm DIN rail.
Flexible communication
WLAN, Bluetooth and RS485 enable flexible connection with the app and compatible energy systems.
Tool-free connections
Weidmüller SNAP-IN terminals enable fast and safe connection of suitable conductors.
Local smart home integration
Modbus TCP enables integration into Home Assistant via the local network without mandatory cloud use.
Real-time grid monitoringThe smart meter supports fast adjustment of battery output to current power demand.
Flexible connectivityConnection can be made via WLAN, Bluetooth or the wired RS485 interface.
Compatibility and features
According to the manufacturer, the Smart Meter Gen 2 is compatible with the Anker SOLIX Solarbank Max AC, Solarbank 4 E5000 Pro and first, second and third generation Solarbank systems.
Note: Dual-circuit monitoring, automatic phase correction, circuit protection and extended monitoring of PV systems from other manufacturers are only available in conjunction with approved systems. Please refer to the current manufacturer documents for this product in our shop in the "Downloads" section.
Features at a glance
- Manufacturer: Anker SOLIX
- Product: Smart Meter Gen 2 (three-phase)
- Model: AE1X0311
- Grid system: three-phase
- Rated AC input: 3~ 230/400 V AC, 50/60 Hz, CT 40 mA, 2 W, CAT III
- Maximum measured value: 120 A per channel
- Accuracy class: class 1
- Current measurement accuracy: ±1% at 1–120 A; ±2% below 1 A
Technical data
| Manufacturer | Anker SOLIX |
|---|---|
| Product | Smart Meter Gen 2 (three-phase) |
| Model | AE1X0311 |
| Grid system | Three-phase |
| Rated AC input | 3~ 230/400 V AC, 50/60 Hz, CT 40 mA, 2 W, CAT III |
| Maximum measured value | 120 A per channel |
| Accuracy class | Class 1 |
| Current measurement accuracy | ±1% at 1–120 A; ±2% below 1 A |
| Voltage measurement accuracy | ±1% at normal temperature |
| Communication | Bluetooth, 2.4 GHz WLAN and RS485 |
| Local protocols | Modbus TCP and TCP/IP transparent protocol |
| Power consumption | Below 2 W |
| DIN rail | 35 mm |
| Protection class | IP20, for indoor use only |
| Operating temperature | −25 °C to +55 °C |
| Maximum operating altitude | 2.000 m |
| Dimensions (H × W × D) | 105 × 19 × 66,7 mm |
| Compatible current transformers | CT 63 A (Ø 10 mm) und CT 120 A (Ø 16 mm) |
| Manufacturer's warranty | 2 years according to warranty terms |
| Design life | 10 years |
Subject to changes and errors, images similar.
