SMA Home Storage – sizes, compatibility and planning

Guide · SMA Home Storage

The SMA Home Storage is SMA's modular high-voltage battery – built for SMA hybrid inverters. It consists of identical modules of 3.28 kWh each and grows from 3.2 to 16.4 kWh.

Here you can see which size suits which inverter, which accessories you need and what to look out for during planning and expansion.

To the SMA Home StorageGo straight to compatibility ↓

The key points in brief

One module, five sizesEach HS-BM-3.28-10 module has 3.28 kWh of usable capacity. One tower comprises 1 to 5 modules.
For SMA hybridApproved for Sunny Tripower Smart Energy, Sunny Boy Smart Energy and Sunny Tripower Hybrid X.
On the Tripower Smart EnergyHere 2 to 5 modules are permitted – i.e. 6.5 to 16.4 kWh. The Home Storage 3.2 alone is not sufficient there.
Flexible mountingFloor or wall mounting, protection class IP65, 38 kg per module.

Overview: how the Home Storage is built

Each module has its own battery management. The modules are stacked and connected with pre-assembled cables; commissioning runs automatically via the SMA hybrid inverter, which also updates the battery firmware. For floor mounting there is the HS-BU-10 base unit, and as a top finish the Top Cover.

The sizes in our shop compared

Battery Modules Usable capacity Nominal voltage Weight
Home Storage 3.2 1 × HS-BM-3.28-10 3.28 kWh 96 V 38 kg
Home Storage 6.5 2 × 6.56 kWh 192 V 76 kg
Home Storage 9.8 3 × 9.84 kWh 288 V 114 kg
Home Storage 13.1 4 × 13.12 kWh 384 V 152 kg
Home Storage 16.4 5 × 16.40 kWh 480 V 190 kg

Values according to SMA datasheet. Max. charging/discharging current 36 A, self-consumption at night 2 W per module, protection class IP65.

Compatibility with SMA inverters

Battery Sunny Tripower Smart Energy (STPx.0-3SE-40) Sunny Boy Smart Energy
Home Storage 3.2 – ✓
Home Storage 6.5 ✓ ✓
Home Storage 9.8 ✓ ✓
Home Storage 13.1 ✓ ✓
Home Storage 16.4 ✓ ✓

According to the SMA operating manual and datasheet. The Sunny Tripower Hybrid X is also approved. Standard Sunny Tripower units (e.g. STP 8.0/10.0 3AV-40) and the Tripower X have no battery connection.

Who is the SMA Home Storage suitable for?

You are planning a new three-phase PV system with battery entirely from SMA.STP Smart EnergyHome Storage
You want to start small and expand later.Home Storage 6.5
You would like to control a heat pump or wallbox with PV surplus.Home Manager 2.0
You are looking for a battery for the STP Smart Energy that is not from SMA.Guide STP Smart Energy

Installation and planning

  • Choosing the size: At least 2 modules on the Sunny Tripower Smart Energy. For full charging and discharging power, SMA recommends matching battery size and inverter.
  • Expansion: According to SMA, a capacity expansion is possible within 2 years of commissioning.
  • Mounting: Floor (with base unit), wall or back to back. Take the weight of the tower into account for the surface.
  • Temperature: Charging 0 to 50 °C, discharging −10 to 50 °C.
  • Warranty: 10-year SMA warranty – observe SMA's registration conditions.
  • Backup power: In combination with an SMA hybrid inverter, the Home Storage supports a black start function for backup supply.

More guides

Frequently asked questions

Can I use the Home Storage 3.2 on the Sunny Tripower Smart Energy?

No. According to SMA, 2 to 5 modules are intended for the STP Smart Energy, i.e. from the Home Storage 6.5 upwards. A single module is approved for the Sunny Boy Smart Energy.

How do I expand my battery?

With additional HS-BM-3.28-10 modules on the same tower, up to a maximum of 5 modules. According to SMA, the expansion should take place within 2 years.

Does the Home Storage work with the Sunny Boy Storage?

According to SMA, the Home Storage is approved for the hybrid inverters Sunny Tripower Smart Energy, Sunny Boy Smart Energy and Sunny Tripower Hybrid X.

Can the battery be placed outdoors?

Yes, the modules have protection class IP65. The permissible operating temperatures must be observed.

Who updates the firmware?

With SMA batteries, the battery firmware is installed automatically with the update of the SMA inverter.

Your SMA system – properly planned

You can get hybrid inverter, Home Storage, base unit and Home Manager from us together. Eligible private customers in Germany choose the purchase option "0 % (DE - Privat)" for batteries, inverters and accessories for the PV system.

To the SMA Home StorageTo SMARequest advice

Note: This guide does not replace planning by a qualified electrician. The current SMA approval list ("Approved Batteries") and the firmware versions of inverter and battery are authoritative.

All information without guarantee. Subject to technical changes and errors. The current manufacturer documentation is authoritative.

Back to blog