Zendure SolarFlow – which system is right for you?

Guide · Zendure SolarFlow

Zendure SolarFlow ranges from compact balcony power plant storage to an 8 kWh home battery. There are devices with their own solar inputs (DC) and pure AC batteries for retrofitting a rooftop system.

Here you can see all SolarFlow systems in our shop compared, which expansion battery fits where and how to find the right system.

All Zendure productsGo straight to the comparison ↓

The key points in brief

DC or AC800 Pro 2, 2400 Pro and 4000 Mix Pro have MPPT solar inputs. 2400 AC+ and 4000 Mix AC+ are connected to the household grid.
800 W by defaultAll devices start with 800 W feed-in. Premium mode with more power may only be unlocked in accordance with regulations and by qualified personnel.
New Mix seriesThe SolarFlow 4000 Mix brings 8 kWh in one device – older AB batteries do not fit there.
Smart meterWith the Zendure 3CT or D0, the battery knows your consumption at the house connection.

The SolarFlow systems compared

System Coupling Capacity Expandable to Solar input Grid power
SolarFlow 800 Pro 2 DC 1.92 kWh 11.52 kWh (5 × AB2000) 4 MPPTs, 2,640 W 800 W
SolarFlow 2400 Pro DC 2.4 kWh 16.8 kWh (5 × AB3000L) 4 MPPTs, 3,000 W (+1,800 W AC coupling) 800 W / 2,400 W Premium
SolarFlow 2400 AC+ AC 2.4 kWh 16.8 kWh (5 × AB3000L) – 800 W / 2,400 W Premium
SolarFlow 4000 Mix Pro DC + AC 8.04 kWh according to Zendure up to 50 kWh with dedicated 7 kWh expansion batteries 2 high-voltage MPPTs, 8,000 W (+5,000 W PV-IN AC) 800 W / 4,000 W Premium
SolarFlow 4000 Mix AC+ AC 8.04 kWh according to Zendure up to 50 kWh with dedicated 7 kWh expansion batteries PV-IN AC 5,000 W 800 W / 4,000 W Premium

Values according to Zendure datasheets. Backup/off-grid: 800 Pro 2 up to 1,000 VA, 2400 Pro and 2400 AC+ up to 2,400 VA, 4000 Mix up to 3,680 W.

Which system suits whom?

New balcony power plant with up to four modules.800 Pro 2
Many modules, high power, expansion up to 16.8 kWh.2400 Pro
Retrofit an existing rooftop system with storage.2400 AC+4000 Mix AC+
Large system, lots of capacity in one device, new modules plus existing PV.4000 Mix Pro

Which expansion battery fits?

Battery Capacity Fits
AB2000L 1.92 kWh SolarFlow 800 Pro 2 (AB2000 series)
AB2000X 1.92 kWh SolarFlow 800 Pro 2 – up to 5 units, max. 11.52 kWh
AB3000L 2.88 kWh SolarFlow 2400 Pro and 2400 AC+ – up to 5 units, max. 16.8 kWh
SolarFlow 4000 Mix – New system architecture: according to Zendure, older AB batteries are not compatible

Up to five expansion batteries are possible per main unit. Please check compatibility with your device before purchasing – we are happy to help.

Combination with your PV system

Connecting modules directly800 Pro 2: open-circuit voltage below 55 V per input. 2400 Pro: 14–55 V. 4000 Mix Pro: high-voltage strings of 30–400 V.
Integrating existing PVThe Mix series has a PV-IN AC connection for the inverter of an existing system (up to 5,000 VA).
MeasurementZendure Smart Meter 3CT for three-phase house connections or D0 for the optical meter interface.
Backup powerThe off-grid socket supplies connected devices during a grid failure – switchover for 2400 Pro/AC+ under 15 ms according to Zendure.

Installation and planning

  • Premium mode: More than 800 W only with suitable installation, in accordance with regulations and by qualified personnel.
  • Installation location: All devices are protected to IP65. The 4000 Mix weighs 82 kg – plan for the surface and transport route.
  • Stacking: Expansion batteries are stacked under the main unit and secured with the supplied brackets.
  • Charging in winter: According to the datasheet, charging from 0 °C, discharging from −20 °C.

More guides

Frequently asked questions

What is the difference between 2400 Pro and 2400 AC+?

The 2400 Pro has four MPPT solar inputs with 3,000 W. The 2400 AC+ has no solar inputs and is connected to the household grid for retrofitting. Capacity and expansion are the same.

Do my AB2000 batteries fit the SolarFlow 4000 Mix?

No. According to Zendure, the Mix series uses a new system architecture and does not support older low-voltage expansion batteries.

How much power may I feed in?

800 W by default. Premium mode with 2,400 W or 4,000 W may only be activated in accordance with the applicable regulations and by qualified personnel.

Do I need a smart meter?

For on-demand discharging, yes – for example the Zendure Smart Meter 3CT or D0. According to Zendure, compatible meters from other manufacturers are also supported.

Can I combine an existing rooftop system with the 4000 Mix Pro?

Yes. New modules are connected to the high-voltage MPPT, the inverter of the existing system to the PV-IN AC connection.

Your Zendure system – properly put together

You can get SolarFlow, expansion batteries and smart meters from us together. Eligible private customers in Germany choose the purchase option "0 % (DE - Privat)" for batteries, inverters and accessories for the PV system.

To ZendureZendure accessoriesRequest advice

Note: This guide does not replace planning by a qualified electrician. Batteries must be registered in the market master data register. Higher feed-in power (Premium mode) only in accordance with the applicable regulations and by qualified personnel.

All information without guarantee. Subject to technical changes and errors. The current manufacturer documentation is authoritative.

Back to blog