Which battery suits the KOSTAL PLENTICORE?

Guide · KOSTAL PLENTICORE

The PLENTICORE is one of the most popular hybrid inverters in Germany – but only with the right high-voltage battery does it become a real energy system. The good news: you can choose between KOSTAL's own HELIVOR HV, the BYD HVS and HVM batteries and the Dyness Tower Pro.

Here you can see which batteries KOSTAL has approved for the PLENTICORE G3 and PLENTICORE plus G2 and what else you need.

To all KOSTAL productsGo straight to the battery check ↓

Your PLENTICORE storage system in 3 steps

1. InverterPLENTICORE G3 in S (4–7 kW), M (8.5–12.5 kW) or L (15–20 kW). More power can be unlocked later with an activation code.
2. Activate the batteryThe battery input of the PLENTICORE is activated with an activation code. We generate the code using the serial number of your inverter and send it by email.
3. Battery + energy meterAn approved high-voltage battery and a KOSTAL energy meter at the grid connection point, e.g. the KOSTAL Smart Energy Meter (KSEM).

Battery check: what is approved?

These batteries from our range are approved by KOSTAL for the PLENTICORE. A KOSTAL Smart Energy Meter or KOSTAL Energy Meter is required for all combinations.

Battery PLENTICORE G3 PLENTICORE plus G2 Good to know
KOSTAL HELIVOR HV 9.6 – 28.8 ✓ (from software 3.06.03) ✓ (from software 2.21) KOSTAL's own battery, 3.2 kWh modules, several towers via Combiner Box
KOSTAL HELIVOR HV 6.4 ✓ (from software 3.06.03) – Entry size with 2 modules, G3 only
BYD HVS 5.1 – 12.8 ✓ ✓ BYD firmware from BMU 1.13 / BMS 3.19
BYD HVM 11.0 – 22.1 ✓ ✓ HVM 8.3 on G3 only
BYD HVS+ / HVM+ ✓ ✓ Plus versions with remote diagnostics and OTA updates
Dyness Tower Pro TP7 – TP23 ✓ ✓ Battery software at least V119

"Software" refers to the firmware of the inverter or battery. Update both to the latest version before commissioning. Never mix HVS and HVM in one system.

The batteries at a glance

Decision guide: you want … → choose …

Everything from a single source: inverter, battery and service from KOSTAL.→ KOSTAL HELIVOR HV
A proven brand-name battery with a wide choice of tower sizes.→ BYD HVS→ BYD HVM
A modular LFP battery with 3.84 kWh modules and heating function.→ Dyness Tower Pro
To retrofit your PLENTICORE G3 with a battery later.→ Activation code G3
To stay supplied during a power outage.→ BackUp Switch G3

What else you need

Do you have a PLENTICORE plus G2? For this there is the battery activation code PLENTICORE plus G2.

3 mistakes you should avoid

1. Forgetting the activation codeWithout activation, the PLENTICORE does not work with the battery. Order the code at the same time.
2. No energy meterWithout a KSEM or KOSTAL Energy Meter, there is no measurement at the grid connection – battery management does not work.
3. Old firmwareHELIVOR requires at least software 3.06.03 on the G3, Dyness Tower Pro at least V119. Update beforehand.
Your PLENTICORE storage system – fully planned

You can get the battery, activation code and energy meter from us together. Eligible private customers in Germany can order batteries and inverters with 0% VAT.

Not sure which combination fits? Send us the serial number or model of your inverter – we will check it for you.

Note: This guide does not replace planning by a qualified electrician. Before installation, check KOSTAL's current battery approval, the firmware versions and the requirements of the grid operator.

All information without guarantee. Subject to technical changes and errors. The current manufacturer documentation is authoritative.

Back to blog