Loxone smart home & energy management – the guide

Guide · Loxone

Loxone is building automation from a single source: one Miniserver controls lighting, shading, heating, security and audio – and at the same time handles energy management for the PV system, battery storage, wallbox and heat pump.

Here you will learn which Miniserver suits your project, what Tree and Air mean and how Loxone automatically manages solar power, dynamic electricity tariffs and the power at the house connection.

All Loxone productsLoxone EnergyGo straight to energy management ↓

The key points in brief

One system for the whole houseThe Miniserver is the control centre. Lighting, shading, room climate, access, audio and energy come together in one system and one app.
Energy management is built inFunction blocks such as energy manager, load manager and spot price optimiser distribute solar power according to your priorities and make use of low electricity prices.
Open to many manufacturersLoxone integrates inverters, batteries, heat pumps and meters via Modbus, its own interfaces and meters. The system is planned and set up by a Loxone Partner.

Miniserver, Tree, Air and Link: the Loxone building blocks

At the heart of every Loxone installation is the Miniserver. It stores the program, executes all automations and provides operation via the Loxone App and a web interface. Sensors, actuators and interfaces are connected to it via three technologies:

Loxone Tree (wired)One Tree branch connects up to 50 devices over a maximum of 500 m. The Tree cable carries data and the 24 V supply together. Ideal for new builds and complete renovations. More branches are available with the Tree Extension.
Loxone Air (wireless)Wireless devices, some battery-powered, for retrofitting without new cables. Up to 128 Air devices per Air Base Extension, with encrypted transmission. The Tree to Air Bridge brings Air to where a Tree branch is located.
Loxone Link (extensions)Via Link, you can expand the Miniserver in the distribution board with up to 30 extensions, for example for relays, dimmers, DALI, KNX or Modbus.

Tree and Air can be combined in one project. You will find all extensions and interfaces under Loxone Extensions & Interfaces.

Which Miniserver fits?

Miniserver Miniserver Compact Miniserver Go
In our shop Miniserver 100335 Miniserver Compact 100512 Miniserver Go 100336
Mounting DIN rail in the distribution board DIN rail, compact for smaller distribution boards Surface-mounted, e.g. on the wall; power supply included
Loxone Tree integrated, up to 50 devices integrated, up to 50 devices (Link can additionally be switched to Tree) not integrated
Loxone Air via Air Base Extension or Tree to Air Bridge integrated, up to 128 devices integrated, up to 128 devices
Loxone Link up to 30 extensions up to 30 extensions up to 30 extensions
Inputs and outputs on the device 8 relays, 8 digital, 4 analogue inputs (0–10 V) 2 relays, 4 digital inputs –
Special feature most inputs/outputs directly on the device Tree Turbo and Audioserver function integrated for retrofitting and renovation via wireless
Typical use New builds and larger projects New builds and renovations with Tree, Air and audio Existing buildings without new cables

"–": no inputs/outputs on the device. All three models are suitable for energy management; what matters is how the meter, wallbox and inverter are connected.

How Loxone energy management works

Loxone sees energy management as part of building automation. The Miniserver continuously measures how much electricity is generated, consumed, stored and exchanged with the grid, and on that basis decides which load receives how much power and when. According to Loxone, the central functions run locally on the Miniserver – even if the internet fails. Remote access, weather forecasts and exchange electricity prices require an internet connection.

1. MeasureAn energy meter at the grid connection point provides grid supply and feed-in. In addition, there are data from the inverter, battery and individual loads.
2. DecideBlocks such as the energy manager calculate the surplus and work through your priorities. Optionally, PV forecast and electricity price are taken into account.
3. ControlBattery, wallbox, heat pump, immersion heater or household appliances are switched on or off or their power is regulated.
4. ViewIn the app, the energy flow monitor shows generation, consumption, battery and grid live and as statistics.

Using PV surplus: the energy manager

The function block Energy manager distributes surplus solar power to up to 12 loads. Each load is given a priority, a switch-on power and a rated power. If there is enough surplus, the block switches on as many loads as possible – starting with the highest priority – and switches them off again in reverse order.

Switching or regulatingDigital loads such as a washing machine are switched on and off. Analogue loads such as a wallbox or hot water are regulated by the block between switch-on and rated power.
Battery with minimum state of chargeIf a minimum state of charge (SoC) is set, the energy manager first charges the battery up to that level. Only then do the other loads receive the surplus.
Minimum run timesMinimum run times prevent constant cycling. A daily minimum run time ensures that, for example, hot water is prepared by a set time even without surplus.
Heat pump and hot waterHeat can be stored well. Depending on the device, Loxone can have the heat pump preheat the buffer tank via Modbus, network or SG Ready when there is PV surplus or a low electricity price. With the Loxone weather service and the PV production forecast, the system plans ahead. Which interface your heat pump has is stated in its documentation. Which air-to-water heat pump suits your house is explained in our guide Heat pump: which one fits?.

Charging an electric car with the Loxone Wallbox

The Loxone Wallbox is integrated directly into the Miniserver – via Tree cable or wireless (Air). This allows the energy manager to adjust the charging power to the current solar surplus or shift it into the cheap hours of a dynamic tariff.

Version Connection Note
Wallbox 11 kW (16 A) Tree · Air three-phase up to 11 kW
Wallbox 22 kW (32 A) Tree three-phase up to 22 kW
Wallbox 7.4 kW (32 A) Tree · Air up to 7.4 kW
Up to 5 charging modesFor example "Priority" with maximum power, "Comfort" for gentle charging over a period of time and "Eco" for solar surplus and cheap tariffs.
Operation and billingSelect the charging mode in the app or directly on the wallbox. With the NFC Code Touch user identification and OCPP are possible.
Plan phases in advanceAccording to the documentation, the Loxone Wallbox does not support automatic phase switching. Whether it is connected single-phase or three-phase is determined by the partner during planning.

According to Loxone, wallboxes from other manufacturers are integrated via OCPP.

Dynamic electricity tariffs: the spot price optimiser

With a dynamic electricity tariff, the price changes over the course of the day. The block Spot price optimiser is directly connected to European power exchanges (including EPEX). You specify how many hours a load should run within a period, and the block selects the cheapest hours for this.

Cheapest hoursIdeal for loads with a fixed demand: the electric car charges, the heat pump preheats or the battery charges when electricity is cheapest.
Price levelsIn addition, the block reports "very high", "high", "low" and "very low". This allows loads to be specifically blocked when electricity is expensive.
Even without PVAccording to Loxone, tariff control is worthwhile even without your own PV system. If one is added later, the system is already prepared.

Load management and § 14a EnWG

If the wallbox, heat pump, cooker and instantaneous water heater run at the same time, the house connection reaches its limit. The Load manager monitors the total power. If the set maximum power is exceeded, it throttles or blocks up to 12 loads according to priority. Controllable loads such as the wallbox are first reduced to their minimum power. In "Peak Load Manager" mode, it limits the average power per quarter hour.

Grid-friendly control under § 14a EnWGGrid operators may reduce the power of controllable consumption devices above 4.2 kW, such as heat pumps and wallboxes, in the event of grid congestion. Without energy management, the devices are throttled rigidly. With the Miniserver as the energy management system, Loxone evaluates the control box signal and distributes the permitted power among the devices – the wallbox continues charging with the remaining power, the heat pump can switch to reduced operation via SG Ready. Your electrical contractor will clarify the grid operator's requirements.

Integrating inverters, batteries and meters

Loxone lists inverters and batteries from Fronius, SMA, Kostal and Huawei as integrable. Fronius is supported directly, many other manufacturers via the open Modbus standard. Whether your model is included is shown in the Loxone Library. For the surplus, the balance at the grid connection point is what counts, which is why an energy meter belongs there.

Task Solution Products in our shop
Measuring the grid connection point Direct-measuring meter up to 100 A, MID-certified, measures grid supply and feed-in Energy meter 3-phase Tree · 1-phase
Measuring higher currents Meter with current transformers Energy meter for 1 & 5 A transformers · for 40 mA transformers
Inverter, battery, heat pump via network Modbus TCP is integrated in the Miniserver no additional device required
Devices with Modbus RTU in the distribution board, decentralised via Tree or wireless Modbus Extension · Modbus Tree · Modbus Air
Reading an existing electricity meter Infrared interface of electronic household meters (eHZ) IR Meter Interface Air
Smart meter with DSMR P1 P1 interface from version 4.2 P1 Meter Reader Air
Older meters, gas, water, heat M-Bus M-Bus Extension
Measuring and switching individual devices Wireless socket with power measurement Smart Socket Air

Batteries are usually integrated via the inverter or via Modbus. Matching battery guides: Fronius Reserva, SMA Smart Energy, KOSTAL PLENTICORE, Huawei MAP0 or MB0 and BYD HVS or HVM.

Everything at a glance: app and energy flow monitor

The Energy flow monitor shows in the Loxone App what is happening in the house right now: generation, consumption, battery and grid – live and as daily, monthly and annual statistics, even on the go. In addition, self-consumption, savings and CO₂ savings are shown. You set priorities and charging modes directly in the app. According to Loxone, the data is processed on the Miniserver and not stored in a cloud. According to Loxone, there are no licence or subscription fees for energy management.

Tip: secure the power supplyThe Power Supply & Backup supplies the Miniserver and devices with 24 V, measures the power at each of its seven outputs and, with an additional 36 V battery, keeps the Loxone installation running without interruption during a power outage.

Who is Loxone suitable for?

You are building new or renovating and want lighting, shading, heating and energy in one system.→ Miniserver→ Compact
You have an existing PV system and want to retrofit without new cables.→ Miniserver Go
You want to charge your electric car with solar power or in cheap hours.→ Wallbox Tree→ Wallbox Air
You need accurate measurement at the grid connection point.→ Energy meter 3-phase
Your inverter or heat pump speaks Modbus RTU.→ Modbus Extension→ Modbus Tree

If you only need control for your PV system and wallbox, the energy management of the inverter or wallbox is often sufficient. Loxone plays to its strengths when the whole house is to be automated.

Planning and installation

Loxone is planned, installed and programmed in the Loxone Config software by certified Loxone Partners. According to Loxone, an already installed PV system can be integrated retrospectively. The partner checks in advance whether your inverter offers a suitable protocol.

1. Record the existing setupRecord inverter, battery, heat pump, wallbox, meter location and house connection.
2. Clarify interfacesDefine for each device: Modbus TCP, Modbus RTU, OCPP, SG Ready or switching contact.
3. Choose componentsPut together Miniserver, meter, wallbox and extensions – Tree, Air or both.
4. Set prioritiesWhat gets solar power first: battery, hot water, car or household appliances.

The matching products

Loxone Miniserver 100335 Control centre · DIN rail Miniserver Tree, Link and 8 relays integrated – the control centre for new builds and larger projects. To the product → Loxone Miniserver Compact 100512 Control centre · compact Miniserver Compact Tree, Air, Tree Turbo and Audioserver in one compact device. To the product → Loxone Miniserver Go 100336 Control centre · wireless Miniserver Go With integrated Air for retrofitting without new cables. To the product → Loxone Wallbox 11kW 16A Tree 100526 Wallbox · Tree Wallbox 11 kW Tree Charges with solar surplus or in the cheapest hours – up to 5 charging modes. To the product → Loxone energy meter 3-phase Tree 100567 Energy meter · 3-phase Energy meter 3-phase Tree MID-certified, bidirectional up to 100 A – the measurement at the grid connection point. To the product → Loxone Modbus Extension 100124 Interface · Modbus RTU Modbus Extension Integrates meters, inverters and other devices with Modbus RTU. To the product →

You will find all components in the categories Loxone Energy, Loxone Miniserver, Extensions & Interfaces and Climate & Shading.

3 mistakes you should avoid

1. Measuring only the PV outputFor the surplus, the balance at the grid connection point is what counts. Without a meter there, the energy manager does not know what is really left over.
2. Not checking interfaces beforehandNot every device provides all values via every interface. Check the Loxone Library and the manufacturer's documentation before purchasing.
3. Planning the wallbox phases incorrectlyThe Loxone Wallbox does not switch automatically between single-phase and three-phase. Determine the connection and charging target beforehand.

Frequently asked questions

Do I need a battery for Loxone energy management?

No. Even without a battery, the wallbox, heat pump and household appliances run when the sun is shining. With a battery, you can additionally shift solar power into the evening.

Does energy management work without the internet?

Yes. According to Loxone, PV surplus charging, battery logic and heat pump control run locally on the Miniserver. Remote access, weather forecasts and exchange electricity prices require an internet connection.

Can I integrate my existing PV system?

In many cases, yes. Loxone lists inverters from Fronius, SMA, Kostal, Huawei and SolarEdge as integrable, usually via Modbus. Whether your model is supported is shown in the Loxone Library.

Which Miniserver is the right one?

For new builds with many cables the Miniserver or Miniserver Compact, for wireless retrofitting the Miniserver Go. All three are suitable for energy management.

Do I need a smart meter from the grid operator?

Not necessarily. According to Loxone, PV surplus charging, heat pump control, load management and the energy flow display also work with Loxone's own energy meters. Existing meters can be read via infrared, P1 or M-Bus depending on the interface.

Can Loxone work with dynamic electricity tariffs?

Yes. The spot price optimiser retrieves the exchange electricity prices and shifts loads such as wallbox, heat pump or battery into the cheapest hours.

Can I install Loxone myself?

Loxone is planned and commissioned via certified partners. Work on the electrical installation is a job for a qualified electrician.

Does energy management incur ongoing fees?

According to Loxone, there are no licence or subscription fees for energy management.

Your Loxone system – components from a single source

With us you will find Miniserver, energy meters, wallbox, extensions as well as sensors and actuators for the whole house. Plus matching inverters, batteries and heat pumps.

Unsure which components you need? Send us your system data – we will help you choose.

Note: This guide does not replace planning by a Loxone Partner and a qualified electrician. Before installation, check interfaces, compatibility and the requirements of the grid operator using the current Loxone documentation.

All information without guarantee. Subject to technical changes and errors. The current manufacturer documentation is authoritative.

Back to blog