Dyness Tower, Tower Pro, Stack100 or PowerBrick?

Guide · Dyness

Dyness builds lithium iron phosphate batteries for almost every system size – from single-family homes to businesses. In our shop you will find four series that differ significantly in module size, expansion and installation.

Here you can see which series suits your project and which inverters are approved.

To all Dyness batteriesGo straight to the series comparison ↓

The four series compared

Series Type Modules Sizes in our shop Special feature
Dyness Tower High-voltage 3.55 kWh (HV9637) T7 – T21 (7.10–21.31 kWh) Version V2.0, IP54
Dyness Tower Pro High-voltage 3.84 kWh (HV9640) TP7 – TP23 (7.68–23.04 kWh) integrated heating and fire suppression system, up to 12 towers in parallel
Dyness Stack100 High-voltage 5.12 kWh (S51100) 15.36–76.80 kWh, 3–15 modules per tower for large projects, IP20 – indoor installation
Dyness PowerBrick Plus Low-voltage 51.2 V 16.08 kWh per unit PowerBrick Plus 16.07 kWh IP65, floor or wall mounting, up to 50 units in parallel

Usable energy according to the datasheet: e.g. Tower T10 10.13 kWh, Tower Pro TP11 10.94 kWh, PowerBrick Plus 15.28 kWh.

Which inverter fits?

Inverter Tower Tower Pro Good to know
KOSTAL PLENTICORE G3 / plus G2 – ✓ according to the KOSTAL battery list TP7 – TP23, battery software from V119, with KSEM
GoodWe ET-20 ✓ ✓ according to manufacturer information on the GoodWe ET-20

For all other combinations, the current Dyness compatibility list applies. Send us your inverter model and we will check the approval before you order.

The batteries at a glance

Decision guide: you want … → choose …

A battery for a single-family home with heating and extinguishing system.→ Tower Pro
Expand an existing Dyness Tower.→ Module HV9637
Expand a Tower Pro.→ Module HV9640
A large project with 15 to 77 kWh per tower.→ Stack100
Equip a low-voltage inverter with a battery.→ PowerBrick Plus

3 mistakes you should avoid

1. Mixing seriesDo not combine Tower and Tower Pro modules. The Tower Pro BMS GEN2 does not fit the Dyness Tower.
2. Confusing high-voltage and low-voltageThe PowerBrick Plus is a 51.2 V battery and requires a low-voltage inverter.
3. Stack100 outdoorsThe Stack100 has protection class IP20 and belongs in a protected indoor room.
Your Dyness battery – properly checked

You can get batteries, expansion modules and BMS from us together. Eligible private customers in Germany choose the purchase option "0 % (DE - Privat)" for batteries, inverters and accessories for the PV system.

Note: This guide does not replace planning by a qualified electrician. The current Dyness compatibility list, the approvals of the inverter manufacturers and the requirements of the grid operator are authoritative.

All information without guarantee. Subject to technical changes and errors. The current manufacturer documentation is authoritative.

Back to blog