Clenergy mounting system – PV mounting on pitched roofs

Guide · Clenergy mounting system

The mounting system holds your solar modules securely on the roof for decades. We stock the Clenergy PV-ezRack mounting set for pitched roofs – as a complete set for 8 to 40 modules, including roof hooks, rails, clamps and small parts.

Here you can see how the system is built, for which roof types Clenergy offers solutions and how to plan your set correctly.

To the Clenergy setGo straight to planning ↓

The key points in brief

Complete setOne set per number of modules – from 8 to 40 modules in steps of two, with all components for pitched roof mounting.
Rails 2.40 mThe mounting rails in the set are each 2.40 m long and are extended with connectors.
Tested systemAccording to Clenergy, the roof systems comply with the relevant EU standards (e.g. EN 1991, EN 1999) and are CE-marked.
Planning mattersRoof hook spacing and number depend on the roof, snow and wind load – check on a project-specific basis beforehand.

How the Clenergy pitched roof system is built

The principle is the same for all pitched roofs: Roof hooks are fastened to the rafter and routed under the roof covering. Resting on the hooks are aluminium rails, on which the modules are fastened with end and middle clamps . Earthing clamps, cable clips and end caps complete the system.

For its PV-ezRack system, Clenergy relies on adjustable roof hooks for different tile thicknesses and construction tolerances as well as screwless rail connectors that simply snap into place.

Mounting solutions by roof type

Roof type Solution from Clenergy In our shop
Tiled and pantile roof (e.g. Frankfurter Pfanne) Adjustable roof hooks with rail (SolarRoof Pro) Complete set 8–40 modules
Flat tiles Roof hooks for flat tiles with rail on request
Slate special stainless steel roof hooks for slate on request
Trapezoidal sheet metal Fastening on the sheet metal, also rail-free (U Support, Mycro Rail) on request
Flat roof Elevated mounting systems (e.g. SolarTripod) on request

Solutions according to Clenergy product information. In our shop, the complete set for pitched roofs with roof hooks is available; we will be happy to plan other roof types with you.

Set contents by number of modules

This is how many components are included in some example set sizes. You will find the complete list for all sizes on the product page.

Modules Rails (2.40 m) Roof hooks End clamps Middle clamps
8 8 26 16 20
12 12 32 16 24
20 20 52 16 32
30 30 64 24 52
40 40 84 24 68

Information according to the set parts list in our shop. Also included: rail connectors, earthing clamps, cable clamps, earthing lugs and end caps.

Who is the set suitable for?

You are planning a PV system on a tiled or pantile roof and would like everything from one set.Clenergy set
You need individual clamps, end caps or screws to reorder.B&M mounting system
You are still looking for the right solar modules.Guide solar modules
Your roof is made of sheet metal, slate or is flat.Request advice

Installation and planning

  • Check module dimensions: Module width, length and frame height determine rail length and choice of clamps.
  • Plan the layout: Determine the number and arrangement of modules (portrait or landscape, rows) and choose the set size accordingly.
  • Take loads into account: Snow and wind load zone as well as building height influence the number of roof hooks. Clenergy offers the ezDesign planning software with parts list and structural calculation for this.
  • Hit the rafters: Always screw roof hooks to the rafter and adjust the tiles so that the roof covering remains watertight.
  • Specialist company: Work on the roof and the electrical connection belong in the hands of professionals.

More guides

Frequently asked questions

How many modules is the set available for?

For 8 to 40 modules in steps of two. Simply select the appropriate number of modules when ordering.

How long are the rails?

The mounting rails in the set are each 2.40 m long and are extended with the supplied connectors.

Does the set also fit a metal roof?

The set is equipped with roof hooks for pitched roof mounting. For trapezoidal sheet metal, slate or flat roofs, Clenergy offers its own fastenings – please contact us.

Can I install the system myself?

Mounting on the roof requires experience and fall protection; the electrical connection is a job for a qualified electrician. We recommend a specialist company.

Is there structural verification?

According to Clenergy, the most important systems have been tested by independent testing laboratories such as TÜV; the manufacturer provides certificates on request.

Your mounting system – matched to your system

You can get mounting set, solar modules and inverters from us together. Eligible private customers in Germany choose the purchase option "0 % (DE - Privat)" for batteries, inverters and accessories for the PV system.

To the Clenergy setB&M mounting systemRequest advice

Note: This guide does not replace planning by a specialist company. Structural loads, snow and wind loads and the condition of the roof covering must be checked on a project-specific basis. The installation instructions and Clenergy's specifications are authoritative.

All information without guarantee. Subject to technical changes and errors. The current manufacturer documentation is authoritative.

Back to blog