BYD HVS+ vs. HVS – what is the difference?

Guide · BYD HVS+ and HVS

HVS+ and HVS look almost identical and have the same tower sizes from 5.12 to 12.8 kWh. Nevertheless, they are two separate series with their own control unit, their own modules and their own inverter approval.

Here you can see what the Plus version does differently, where the classic HVS is still the better choice and what to look out for regarding expansion and inverter.

View all BYD batteriesGo straight to the decision guide ↓

HVS+ and HVS at a glance

BYD B-BOX PREMIUM HVS+ 10.2 Battery Box BYD HVS+ – the new generation
  • Module 2.56 kWh, 102.4 V
  • 2 to 5 modules: 5.12 to 12.8 kWh per tower
  • Continuous current 25 A, peak 55 A for 15 s
  • Automatic SOC adjustment, remote diagnostics and OTA updates
  • Setup via the BYD Energy App
BYD B-BOX PREMIUM HVS 10.2 BATTERY STORAGE 10.24 KWH - BCU 2.0 BYD HVS – the proven classic
  • Module 2.56 kWh, 102.4 V
  • 2 to 5 modules: 5.12 to 12.8 kWh per tower
  • Continuous current 25 A, peak 50 A for 3 s
  • Battery efficiency ≥ 96%
  • Very broad inverter approval

In short: capacity and voltage are the same. The HVS+ sustains its peak current longer and comes with more smart functions. The HVS scores with the longer approval list.

Technical data in direct comparison

Feature HVS+ HVS
Battery module 2.56 kWh · 102.4 V · 38.5 kg 2.56 kWh · 102.4 V · 38 kg
Modules per tower 2 to 5 2 to 5
Usable energy per tower 5.12 · 7.68 · 10.24 · 12.8 kWh 5.12 · 7.68 · 10.24 · 12.8 kWh
Max. capacity (3 towers) 38.4 kWh 38.4 kWh
Continuous current 25 A 25 A
Peak current 55 A for 15 s 50 A for 3 s
Nominal voltage 204.8 to 512 V 204.8 to 512 V
Width × depth 610 × 282 mm 585 × 298 mm
Height (2 to 5 modules) 747 to 1,467 mm 762 to 1,461 mm
Weight (2 to 5 modules) 91.1 to 206.6 kg 91 to 205 kg
Battery efficiency ≥ 95 % ≥ 96 %
Smart functions Automatic SOC adjustment, balancing optimiser, remote diagnostics, OTA updates Be Connect 2.0 app
Expansion Possible at any state of charge With modules of the HVS series
Protection class / temperature IP55 · −10 to +50 °C IP55 · −10 to +50 °C
Operating modes Grid, grid + backup, off-grid Grid, grid + backup, off-grid
Warranty 10 years* 10 years*

Usable DC energy at 100% depth of discharge. Depending on the inverter, the usable value may differ slightly. * BYD's warranty conditions apply.

What the Plus version really does better

More reserve in peak currentThe HVS+ delivers 55 A for 15 seconds instead of 50 A for 3 seconds. This helps when many devices start up at the same time for a short while.
Expansion at any state of chargeAccording to the manufacturer, new modules can be added at any state of charge. A built-in balancing optimiser equalises the modules.
Remote maintenance and updatesRemote diagnostics and OTA firmware updates run via the BYD Energy App, with the smart WiFi/LAN module.
Somewhat slimmerAt 282 mm, the HVS+ is 16 mm shallower but 25 mm wider. The height remains almost the same.

Where the classic HVS is still ahead

The HVS has been on the market for years and is approved for a great many hybrid inverters. The approval list for the HVS+ is shorter. It currently covers mainly KOSTAL, Fronius, GoodWe, Solis, SMA Sunny Tripower Smart Energy and the BYD Power-Box.

If your inverter, for example a Sungrow or an SMA Sunny Boy Smart Energy, is only approved for the HVS, the HVS remains the safe choice. In addition, BYD specifies a battery efficiency of ≥ 96% for the HVS and ≥ 95% for the HVS+.

Does it match my inverter?

The table shows how many modules per tower BYD has approved for common inverters. A "–" means there is no approval for this series.

Inverter HVS+ HVS
KOSTAL PLENTICORE plus (G2) / G3 2–5 2–5
Fronius Symo GEN24 Plus 2–5 2–5
Fronius Primo GEN24 Plus 2–3 2–3
Fronius Verto Plus 2–5 2–5
GoodWe ET 15–30 kW 2–5 2–5
Solis S6-EH3P 2–5 2–5
SMA Sunny Tripower Smart Energy 5–10 2–5 2–5
SMA Sunny Boy Smart Energy 3.6–6.0 – 2–4
Sungrow SH5.0–10RT – 2–5
BYD Power-Box TH5–15K 2–5 –

For each combination, BYD specifies a minimum firmware for inverter and battery. On the Fronius inverter, the HVS+ is set as a "Compatible battery". With GoodWe, the HVS+ is approved for the ET G2, the HVS for the ET 5–10 kW. Before ordering, check the permissible number of modules for the specific power class.

Decision guide: you need … → choose …

New system with KOSTAL, Fronius, GoodWe, Solis or SMA Sunny Tripower Smart Energy, and you want app, remote diagnostics and updates.→ HVS+, e.g. HVS+ 10.2
Your inverter is only approved for the HVS , for example a Sungrow or an SMA Sunny Boy Smart Energy.→ HVS, e.g. HVS 10.2
You are planning the BYD Power-Box as your inverter.→ HVS+→ Power-Box TH
Your HVS+ is already installed and needs more capacity.→ HVS+ module 2.56 kWh
Your HVS is already installed and needs more capacity.→ HVS module 2.56 kWh
You want to run several towers on one inverter.→ Combiner Box Plus CBH-70A

All tower sizes in our shop

Frequently asked questions about HVS+ and HVS

Can I install HVS+ modules in an existing HVS?

No. HVS+ and HVS have their own modules and their own control unit (BCU). Different battery series must not be mixed in one system. Always expand with modules of the same series.

Is the HVS+ a larger battery than the HVS?

No. Both have 2.56 kWh per module and the same tower sizes from 5.12 to 12.8 kWh. The difference lies in peak current, control, app and inverter approval.

Which app do I need?

HVS+ is set up and monitored with the BYD Energy App. This requires the smart WiFi/LAN module. For the previous series, the Be Connect 2.0 app remains available.

Does backup power work with both series?

Yes, both series are designed for grid, backup and off-grid operation. Whether and how much backup power you get is determined by the inverter with its backup function and the electrical installation.

What is the maximum possible capacity?

With up to three identical towers in parallel, up to 38.4 kWh is possible with both series. Several towers require a Combiner Box.

May the HVS+ be installed in the garage or outdoors?

Yes, both series have protection class IP55 and are approved for indoor and outdoor use. The operating range is −10 to +50 °C. With the classic series, BYD reduces the charging power between −10 and +5 °C. With the Plus series, too, the current may decrease depending on temperature.

How long is the warranty?

BYD gives 10 years on both HVS+ and HVS. The manufacturer's warranty conditions apply.

Read more

Still undecided between HVS and HVM? Our guide BYD HVS vs. HVM shows the difference. More capacity at a lower height is offered by the BYD HVB.

Matching categories in our shop BYD HVS+BYD HVSBYD HVM+BYD accessories
Ready for your BYD battery?

Eligible private customers in Germany can order these storage systems with 0% VAT.

Unsure whether HVS+ or HVS suits your inverter? Write to us and we will check the combination for you.

To all BYD productsRequest advice

Note: This guide does not replace planning by a qualified electrician. Before installation, check BYD's current compatibility approval and the required firmware.

Sources (as of 17 Nov 2026): BYD datasheet Battery-Box HVS+ (V1.2) · BYD datasheet Battery-Box Premium HVS (BCU 2.0) · BYD compatibility list HVB/HVM+/HVS+ (V1.9) · BYD compatibility list HVS/HVM (V2.22) · BYD operating manual HVS/HVM (BCU 2.0, V1.2)

All information without guarantee. Subject to technical changes and errors. The current manufacturer documentation is authoritative.

Back to blog