BYD HVM+ vs. HVM – what is the difference?

Guide · BYD HVM+ and HVM

HVM+ and HVM are the BYD batteries for high capacity and high battery current, i.e. for heat pumps, electric cars or large households. Both are available from 8.28 to 22.08 kWh per tower.

Here you can see what the Plus version does differently, when the classic HVM makes more sense and which inverters suit which series.

View all BYD batteriesGo straight to the decision guide ↓

HVM+ and HVM at a glance

BYD B-BOX PREMIUM HVM+ 16.6 BATTERY STORAGE 16.56 KWH BYD HVM+ – the new generation
  • Module 2.76 kWh, 51.2 V
  • 3 to 8 modules: 8.28 to 22.08 kWh per tower
  • Continuous current 50 A, peak 80 A for 15 s
  • Automatic SOC adjustment, remote diagnostics and OTA updates
  • Setup via the BYD Energy App
BYD B-BOX PREMIUM HVM 16.6 BATTERY STORAGE 16.56 KWH - BCU 2.0 BYD HVM – the proven classic
  • Module 2.76 kWh, 51.2 V
  • 3 to 8 modules: 8.28 to 22.08 kWh per tower
  • Continuous current 50 A, peak 75 A for 3 s
  • Battery efficiency ≥ 96%
  • Very broad inverter approval

In short: capacity, voltage and continuous current are the same. The HVM+ sustains more peak current for longer and comes with smart functions. The HVM has the longer approval list.

Technical data in direct comparison

Feature HVM+ HVM
Battery module 2.76 kWh · 51.2 V · 41.4 kg 2.76 kWh · 51.2 V · 35 to 38 kg
Modules per tower 3 to 8 3 to 8
Usable energy per tower 8.28 to 22.08 kWh 8.28 to 22.08 kWh
Max. capacity (3 towers) 66.2 kWh 66.2 kWh
Continuous current 50 A 50 A
Peak current 80 A for 15 s 75 A for 3 s
Nominal voltage 153.6 to 409.6 V 153.6 to 409.6 V
Width × depth 610 × 282 mm 585 × 298 mm
Height (3 to 8 modules) 987 to 2,187 mm 995 to 2,160 mm
Weight (3 to 8 modules) 138.3 to 345.3 kg 119 to 319 kg
Battery efficiency ≥ 95 % ≥ 96 %
Smart functions Automatic SOC adjustment, balancing optimiser, remote diagnostics, OTA updates Be Connect 2.0 app
Expansion Possible at any state of charge With modules of the HVM series
Protection class / temperature IP55 · −10 to +50 °C IP55 · −10 to +50 °C
Operating modes Grid, grid + backup, off-grid Grid, grid + backup, off-grid
Warranty 10 years* 10 years*

Usable DC energy at 100% depth of discharge. Depending on the inverter, the usable value may differ slightly. * BYD's warranty conditions apply.

All tower sizes at a glance

Tower Modules Usable energy Nominal voltage HVM+ height HVM height Shop
8.3 3 8.28 kWh 153.6 V 987 mm 995 mm HVM+ → · HVM →
11.0 4 11.04 kWh 204.8 V 1,227 mm 1,228 mm HVM+ → · HVM →
13.8 5 13.80 kWh 256 V 1,467 mm 1,461 mm HVM+ → · HVM →
16.6 6 16.56 kWh 307.2 V 1,707 mm 1,694 mm HVM+ → · HVM →
19.3 7 19.32 kWh 358.4 V 1,947 mm 1,927 mm HVM+ → · HVM →
22.1 8 22.08 kWh 409.6 V 2,187 mm 2,160 mm HVM+ → · HVM →

A fully expanded tower with 8 modules is over 2.1 m high. Measure the room height and wall clearance beforehand.

What the Plus version really does better

More peak current, for longer80 A for 15 seconds instead of 75 A for 3 seconds. This provides reserve when the heat pump, cooker and wallbox draw power at the same time.
Expansion at any state of chargeAccording to the manufacturer, new modules can be added at any state of charge. A built-in balancing optimiser equalises the modules.
Remote maintenance and updatesRemote diagnostics and OTA firmware updates run via the BYD Energy App, with access for your installer if you grant it.
Somewhat slimmer282 mm depth instead of 298 mm. In return, the HVM+ is 25 mm wider and somewhat heavier per module.

Where the classic HVM is still ahead

The HVM is approved for a great many hybrid inverters, including Sungrow and SMA Sunny Boy Smart Energy. The list for the HVM+ is shorter. It currently covers mainly KOSTAL, Fronius, GoodWe, Solis, SMA Sunny Tripower Smart Energy and the BYD Power-Box. In addition, BYD specifies a battery efficiency of ≥ 96% for the HVM and ≥ 95% for the HVM+.

Does it match my inverter?

The table shows how many modules per tower BYD has approved for common inverters. A "–" means there is no approval for this series.

Inverter HVM+ HVM
KOSTAL PLENTICORE G3 3–8 3–8
KOSTAL PLENTICORE plus (G2) 3–8 4–8
Fronius Symo GEN24 Plus 4–8 4–8
Fronius Primo GEN24 Plus 4–7 4–7
Fronius Verto Plus 4–8 4–8
GoodWe ET 15–30 kW 4–8 4–8
Solis S6-EH3P 3–8 3–8
SMA Sunny Tripower Smart Energy 5–10 4–8 4–8
SMA Sunny Boy Smart Energy 3.6–6.0 – 3–8
Sungrow SH5.0–10RT – 4–8
BYD Power-Box TH5–15K 4–8 –

For each combination, BYD specifies a minimum firmware. On the Fronius inverter, the HVM+ is set as a "Compatible battery". With GoodWe, the HVM+ is approved for the ET G2, the HVM for the ET 5–10 kW. With Fronius, parallel connection of 3 × HVM 22.1 is not possible. Before ordering, check the permissible number of modules for the specific power class.

Decision guide: you need … → choose …

New system with KOSTAL, Fronius, GoodWe, Solis or SMA Sunny Tripower Smart Energy, plus a heat pump or electric car, and you want an app and remote maintenance.→ HVM+, e.g. HVM+ 16.6
Your inverter is only approved for the HVM , for example a Sungrow or an SMA Sunny Boy Smart Energy.→ HVM, e.g. HVM 16.6
You are planning the BYD Power-Box as your inverter.→ HVM+→ Power-Box TH
Your HVM+ is already installed and needs more capacity.→ HVM+ module 2.76 kWh
Your HVM is already installed and needs more capacity.→ HVM module 2.76 kWh
You need more than 22 kWh per tower or have little room height.→ BYD HVB

Popular tower sizes in our shop

Frequently asked questions about HVM+ and HVM

Can I expand an existing HVM with HVM+ modules?

No. HVM+ and HVM have their own modules and their own control unit (BCU). Different battery series must not be mixed in one system. Always expand with modules of the same series.

Does the HVM+ have more capacity than the HVM?

No. Both have 2.76 kWh per module and the same tower sizes from 8.28 to 22.08 kWh. The difference lies in peak current, control, app and inverter approval.

HVM+ or HVS+: what do I need?

At 50 A, the HVM+ has twice the continuous current of the HVS+ and up to 22.08 kWh per tower. The HVS+ goes up to 12.8 kWh per tower and is sufficient for many normal households. With a heat pump, electric car or high loads, the HVM+ is usually the better choice.

What is the maximum possible capacity?

With up to three identical towers in parallel, up to 66.2 kWh is possible with both series. Several towers require a Combiner Box.

Does backup power work?

Yes, both series are designed for grid, backup and off-grid operation. How much backup power is available is determined by the inverter with its backup function and the electrical installation.

May the battery be installed outdoors?

Yes, both series have protection class IP55 and are approved for indoor and outdoor use. The operating range is −10 to +50 °C. With the classic series, BYD reduces the charging power between −10 and +5 °C. With the Plus series, too, the current may decrease depending on temperature.

How long is the warranty?

BYD gives 10 years on both HVM+ and HVM. The manufacturer's warranty conditions apply.

Read more

The comparison of the smaller series can be found in BYD HVS+ vs. HVS. The difference between HVS and HVM is explained in BYD HVS vs. HVM.

Matching categories in our shop BYD HVM+BYD HVMBYD HVS+BYD accessories
Ready for your BYD battery?

Eligible private customers in Germany can order these storage systems with 0% VAT.

Unsure which tower size suits your inverter? Write to us and we will check the combination for you.

To all BYD productsRequest advice

Note: This guide does not replace planning by a qualified electrician. Before installation, check BYD's current compatibility approval and the required firmware.

Sources (as of 17 Nov 2026): BYD datasheet Battery-Box HVM+ (V1.2) · BYD datasheet Battery-Box Premium HVM (BCU 2.0) · BYD compatibility list HVB/HVM+/HVS+ (V1.9) · BYD compatibility list HVS/HVM (V2.22) · BYD operating manual HVS/HVM (BCU 2.0, V1.2)

All information without guarantee. Subject to technical changes and errors. The current manufacturer documentation is authoritative.

Back to blog