Anker SOLIX Solarbank – which model is right for you?

Guide · Anker SOLIX

Anker SOLIX offers three routes to solar storage: the Solarbank 3 E2700 Pro and the Solarbank 4 E5000 Pro as all-in-one devices with their own solar inputs, and the Solarbank Max AC as an AC battery for retrofitting.

Here you can see the three systems compared, which expansion battery fits which Solarbank and what to look out for regarding smart meter, feed-in power and installation location.

All Anker SOLIX productsGo straight to the comparison ↓

The key points in brief

DC or ACSolarbank 3 and 4 take solar modules directly (DC). The Solarbank Max AC is connected to the household grid and stores surplus from an existing PV system.
ExpandableEach Solarbank grows with its own batteries: BP2700, BP5000 or BP7000 – up to five per main unit.
800 W by defaultIn plug-and-play operation, all devices feed in up to 800 W. More power only with permanent installation by a qualified electrician.
Smart meterOnly a meter at the house connection ensures that the battery discharges on demand rather than according to a fixed schedule.

The Solarbank series at a glance

Anker SOLIX has developed its Solarbank from a compact balcony storage unit into a modular energy system. All three models use durable LiFePO₄ cells and are set up via the Anker app. The difference lies mainly in how the solar power gets into the battery and how large the system should become.

The models in our shop compared

Feature Solarbank 3 E2700 Pro Solarbank 4 E5000 Pro Solarbank Max AC
Coupling DC (all-in-one) DC (all-in-one) AC (retrofit)
Main unit capacity 2.688 kWh 5.024 kWh 7 kWh
Expansion up to 5 × BP2700, max. 16.128 kWh up to 5 × BP5000, max. around 30 kWh up to 5 × BP7000, max. 42 kWh
Solar input 4 MPPTs, up to 3,600 W 4 MPPTs, up to 5,000 W (1,250 W per input) no PV inputs
Grid power 800 W feed-in, 1,200 W bidirectional inverter 800 W by default, up to 2,500 W with permanent installation 800 W by default, up to 3.5 kW with permanent installation
Backup power output yes up to 2,500 W 3.5 kW / 3.68 kVA
Protection class IP65 IP66 IP66

Values according to Anker SOLIX datasheets and operating instructions. The actual permissible feed-in power depends on the requirements of your grid operator.

Which model suits whom?

You are planning a new balcony power plant with storage and up to eight modules.Solarbank 3
You have a lot of module area – for example on a garage or garden house – and want to store a lot.Solarbank 4
A PV system is already running on the roof and you would like to retrofit it with storage.Solarbank Max AC
You would like to measure consumption at the house connection.Smart meterGen 2 three-phase

Which expansion battery fits?

Main unit Matching battery Good to know
Solarbank 3 E2700 Pro BP2700 Up to five batteries, 16.128 kWh in total.
Solarbank 4 E5000 Pro BP5000 Up to five BP5000. According to Anker also backwards compatible with BP2700 and BP1600 – when mixing, the stacking order can affect the charging power.
Solarbank Max AC BP7000 BP7000 only. BP2700 and BP1600 do not fit the Max AC.

Combination with your PV system

New balcony power plantSolarbank 3 or 4 take over the charge controller and inverter – the modules are connected directly. Observe the permissible open-circuit voltage of the modules (Solarbank 4: max. 60 V per input).
Existing rooftop systemThe Solarbank Max AC works independently of the manufacturer of your PV inverter and stores the surplus from the household grid.
More powerFeed-in of more than 800 W requires a dedicated circuit or permanent installation by a qualified electrician and registration with the grid operator.
Backup powerIn the event of a grid failure, the separate off-grid output supplies the devices connected to it – not the whole house.

Installation and planning

  • Installation location: Solarbank 4 and Max AC are protected to IP66 and suitable for indoor and outdoor use. Take into account the weight of the main units (Solarbank 4: 50 kg, Max AC: 73 kg) and each battery when planning the surface.
  • Capacity: Rule of thumb – store as much as you typically consume in the evening and at night. It can be expanded later.
  • Measurement: Plan the smart meter right away so that the battery discharges on demand rather than according to a schedule.
  • Registration: Register the balcony power plant or battery in the market master data register (Marktstammdatenregister).

More guides

Frequently asked questions

Can I connect the Solarbank Max AC to any PV system?

Yes, it is AC-coupled and works independently of the manufacturer of the existing PV inverter. It charges with the surplus detected by a smart meter at the house connection.

Does the BP2700 fit the Solarbank 4?

According to Anker, the Solarbank 4 E5000 Pro is backwards compatible with BP2700 and BP1600. You achieve full performance with the BP5000.

How much may I feed in?

In plug-and-play operation at the socket, 800 W. Higher values (Solarbank 4 up to 2,500 W, Max AC up to 3.5 kW) only with permanent installation and registration with the grid operator.

Do I absolutely need a smart meter?

Without measurement at the house connection, the Solarbank discharges according to a fixed schedule. With a smart meter, it specifically covers the current consumption – this increases self-consumption.

Does the whole house keep running during a power outage?

No. Only devices connected to the separate backup power or off-grid output are supplied.

Your Solarbank – properly put together

You can get main unit, expansion batteries and smart meter from us together. Eligible private customers in Germany choose the purchase option "0 % (DE - Privat)" for batteries, inverters and accessories for the PV system.

To Anker SOLIXRequest advice

Note: This guide does not replace planning by a qualified electrician. Balcony power plants and batteries must be registered in the market master data register. Feed-in power above 800 W only with permanent installation and in accordance with the grid operator's requirements.

All information without guarantee. Subject to technical changes and errors. The current manufacturer documentation is authoritative.

Back to blog