All-in-one storage compared: GoodWe, EP Cube, Huawei, Sungrow

Guide · All-in-one storage systems compared

All-in-one storage systems combine a hybrid inverter, battery modules and energy management in one stacked unit. This saves space, cabling and installation time. Four manufacturers in our range use this concept: GoodWe with the ESA series, Canadian Solar with the EP Cube, Huawei with the LUTERRA S2 and Sungrow with the PowerHarbor.

We compare the four systems on the basis of the manufacturers’ datasheets, manuals and warranty terms, and we name their strengths and weaknesses. Important up front: GoodWe ESA and EP Cube can be ordered from us right away. LUTERRA S2 and PowerHarbor have been announced but are not yet on sale in Germany.

To the GoodWe ESA series Straight to the comparison table ↓

The four systems at a glance

GoodWe ESAThree-phase, 5 to 29.9 kW in our shop. Battery modules with 5 and 8 kWh usable capacity, 5 to 48 kWh in our shop. Backup output built in. Available to order now.
Canadian Solar EP CubeThree-phase up to 12 kVA, power adjustable via software. 5 kWh modules, 10 to 40 kWh per system. Backup with an additional Smart Gateway. Available to order now.
Huawei LUTERRA S2Single-phase 3 to 10 kW, three-phase 5 to 20 kW. Packs with 5 and 7 kWh, up to 28 kWh per tower. Not yet on sale.
Sungrow PowerHarborThree-phase, 10 to 30 kW. Modules with 6, 9 and 10 kWh, up to 60 kWh per tower. Not yet on sale.
Status: November 2026. For the Huawei LUTERRA S2 and the Sungrow PowerHarbor only preliminary manufacturer information is available so far. German prices and warranty terms have not yet been published. The values may change until market launch.

Comparison table

All values come from the manufacturers’ current datasheets, user manuals and warranty statements. Where a point is not described in the documents, the table says so. On a smartphone you can swipe the table sideways.

FeatureGoodWe ESACanadian Solar EP Cube (three-phase)Huawei LUTERRA S2Sungrow PowerHarbor
Status in our shopAvailable to order nowAvailable to order nowAnnounced, not yet on saleAnnounced, not yet on sale
InverterThree-phase; 5, 6, 8, 10, 12, 15, 20, 25 and 29.9 kW in our shopThree-phase, up to 12 kVA; adjustable via software between 5 and 12 kWSingle-phase 3–10 kW, three-phase 5–20 kW; up to 3 units in parallel (60 kW)Three-phase, 10–30 kW
PV inputUp to 200 % of the inverter power (e.g. 24 kWp on the 12 kW unit); 3 MPPTs up to 8 kW, 4 MPPTs from 10 kW; max. 1,000 VMax. 24 kWp; 4 MPPTs with 17 A each; max. 1,000 VThree-phase up to 40 kWp, up to 3 MPPTs, max. 1,100 V (preliminary)Up to 50 kWp; 3 or 4 MPPTs; max. 1,000 V (preliminary)
Battery modules5.0 and 8.0 kWh usable (5.12 / 8.32 kWh nominal), can be mixed in one system5 kWh nominal capacity per module, under 42 kg4.9 and 6.9 kWh usable (5.02 / 7.03 kWh nominal)5.7 / 8.7 / 9.6 kWh usable (6 / 9 / 10 kWh nominal), can be mixed
Capacity and expansionUp to 6 modules per tower, up to 12 modules per system; 5–48 kWh selectable in our shop; up to 96 kWh with 8 kWh modules, according to the datasheet up to 108 kWh with the announced 9 kWh modules2 to 8 modules, i.e. 10–40 kWh per system; up to 5 systems in parallel (around 200 kWh)Up to 4 packs per tower (28 kWh); up to 336 kWh when interconnectedUp to 6 modules per tower (60 kWh); two systems up to 120 kWh
Cell chemistryLFP (LiFePO₄)LFP (LiFePO₄)LFP (according to trade press); Huawei states cells with more than 318 AhLFP (LiFePO₄), 314 Ah cells
Backup powerBuilt-in backup output, three-phase, switchover in under 4 ms; additional bypass up to 63 A to supply the whole houseOnly with the optional Smart Gateway; switchover in under 20 ms, up to 12 kVA, unbalanced load possibleIntegrated; switchover in under 10 ms, up to 20 kW loadVia the EnergyBridge; switchover 0 ms according to the manufacturer
Protection rating and installation siteIP66; inverter −35 to +60 °C, battery −20 to +55 °C; suitable for indoor and outdoor use according to the manual, sheltered location recommended; wall or floor mountingInverter IP65, battery modules IP67; operation −20 to +50 °C, charging from 0 °C; floor mounting, wall mounting optionalIP66; operation −25 to +60 °C; corrosion protection up to C5-MIP66, indoor and outdoor; corrosion protection C5; battery −20 to +50 °C
Cooling and noiseControlled fans; inverter ≤ 35 dB (5–8 kW) or ≤ 40 dB (10–20 kW), battery ≤ 29 dBNatural cooling, under 30 dB at 2 m distancePassive without fans, under 29 dB (Huawei lab measurement)Up to 15 kW convection (typically 35 dB(A)), above that fans (typically 50 dB(A))
WarrantyInverter 10 years; battery 10 years with at least 70 % usable capacity or up to 3.00 MWh throughput per kWh10-year product warranty; battery at least 80 % capacity after 10 years or 6,000 full cycles; condition: permanent internet connectionNot yet published for GermanyNot yet published for Germany
Mounting and installationPre-wired and stacked by plugging together, mounted in around 10 minutes according to GoodWe; built-in meter with supplied current transformersModular with light individual modules; base and smart meter included in deliveryAccording to Huawei, 10 minutes to install and 5 minutes to commissionPluggable tower without cables between the modules; the EnergyBridge is installed in the distribution board
App and monitoringSEMS+ (app and web), SolarGo; Wi-Fi, LAN, Bluetooth, optional 4GEP Cube App; Wi-Fi and Ethernet, remote updatesFusionSolar AppiSolarCloud; energy management via the iHomeManager Mini
Wallbox and heat pumpGoodWe wallbox via the EMS port (only with a single inverter); SG Ready heat pump via switching contact; connection for control under § 14a EnWG (German Energy Industry Act)EP EV Charger powered by KEBA (7.4 or 11 kW, OCPP 1.6); heat pump connection not described in the documentsInterfaces EEBUS, SG-Ready, OCPP and Modbus-TCPConnection of Shelly devices via the iHomeManager Mini; wallbox and heat pump connection not described in the preliminary datasheets
Price in our shop (0 % DE – private)From €2,495.00 (5 kW, 5 kWh); e.g. 10 kW with 10 kWh: €3,905.00From €4,481.00 (10 kWh); 20 kWh: €6,693.00No price yetNo price yet
Price per kWh in our shopFrom €236 per usable kWh (large storage with 8 kWh modules); around €391 at 10 kWhFrom €278 per kWh of nominal capacity (40 kWh); around €448 at 10 kWh––

Note on the figures: for GoodWe, the storage sizes of our variants refer to the usable capacity. For the EP Cube, the datasheet only states the nominal capacity, so the usable capacity may be slightly lower.

Price comparison at the same inverter power

To keep the comparison fair, we compare the GoodWe ESA 12 kW with the EP Cube, which also delivers up to 12 kVA. All prices apply to the 0 % (DE – private) variant, as of 20 November 2026.

Storage sizeGoodWe ESA 12 kWCanadian Solar EP Cube
15 or 16 kWh15 kWh: €5,240.00 (€349/kWh)
16 kWh: €4,750.00 (€297/kWh)
15 kWh: €5,587.00 (€372/kWh)
20 or 24 kWh20 kWh: €6,530.00 (€327/kWh)
24 kWh: €6,440.00 (€268/kWh)
20 kWh: €6,693.00 (€335/kWh)
30 or 32 kWh30 kWh: €9,095.00 (€303/kWh)
32 kWh: €8,130.00 (€254/kWh)
30 kWh: €8,905.00 (€297/kWh)
40 kWh€9,820.00 (€246/kWh)€11,117.00 (€278/kWh)
Backup powerIncluded in the price (backup output built in)Additional Smart Gateway for €725.00

The lower GoodWe figures come from the 8 kWh modules (GW8). At 30 kWh built from 5 kWh modules, the EP Cube is slightly ahead until the Smart Gateway for backup power is added. Anyone who wants backup power therefore pays more for the EP Cube in every size.

GoodWe ESA: advantages and disadvantages

The ESA series is the broadest system in our comparison. We offer nine power levels from 5 to 29.9 kW, each with 5 kWh or 8 kWh modules. Inverter and battery are stacked without cables between the modules. The backup output and a meter with current transformers are already built in.

Advantages
  • Backup power without an extra device: switchover in under 4 ms, plus a bypass up to 63 A to supply the whole house
  • Up to 200 % PV oversizing, for example 24 kWp on the 12 kW unit
  • Widest choice: 5 to 29.9 kW and 5 to 48 kWh in our shop, up to 96 kWh per system with 8 kWh modules
  • IP66, indoor and outdoor; inverter from −35 to +60 °C, battery with integrated heating
  • SG Ready heat pump, GoodWe wallbox and control under § 14a EnWG can be connected directly
  • Lowest price per kWh in this comparison, from €236 per usable kWh
Disadvantages
  • Inverter with fans, up to 40 dB depending on power; LUTERRA S2 and EP Cube work without fans
  • Battery performance warranty with 70 % or 3.00 MWh per kWh is weaker than with the EP Cube
  • Wallbox connection only with a single inverter, not in a parallel system
  • The announced 6 and 9 kWh modules are not yet available

To the products: GoodWe ESA 5 kW, GoodWe ESA 6 kW, GoodWe ESA 8 kW, GoodWe ESA 10 kW, GoodWe ESA 12 kW, GoodWe ESA 15 kW, GoodWe ESA 20 kW, GoodWe ESA 25 kW, GoodWe ESA 29.9 kW and the GoodWe wallbox GW11K-HCA-20.

Canadian Solar EP Cube: advantages and disadvantages

The EP Cube comes from Eternalplanet, a brand of Canadian Solar. The three-phase hybrid inverter delivers up to 12 kVA and can be adjusted to the system via software. Below it, 5 kWh modules are stacked, 2 to 8 per system.

Advantages
  • Very quiet thanks to natural cooling, under 30 dB at 2 m distance
  • Battery modules with IP67 and under 42 kg, easy to carry
  • Strong battery warranty: at least 80 % after 10 years or 6,000 full cycles
  • Smart meter included in delivery; a matching wallbox powered by KEBA with OCPP 1.6 is available from us
  • The inverter also runs without a battery; storage can be added later
Disadvantages
  • Backup power only with an additional Smart Gateway (€725.00 in our shop), switchover in under 20 ms
  • Power limited to 12 kVA and 24 kWp PV
  • Operation only down to −20 °C, charging only from 0 °C
  • The warranty requires a permanent internet connection; batteries can only be added within two years of installation
  • Connection of a heat pump not described in the documents
  • More expensive per kWh for small storage sizes, for example around €448 at 10 kWh

To the products: Canadian Solar EP Cube 3PH, EP Cube Smart Gateway 3PH and EP Cube AC EV Charger 3P KEBA.

Huawei LUTERRA S2: advantages and disadvantages

The LUTERRA S2 is Huawei’s new all-in-one system and was presented in November 2026. It uses silicon carbide power electronics and works without fans. All details can be found in our guide Huawei LUTERRA S2.

Advantages
  • Passive cooling without fans, under 29 dB
  • The only system here that is also available as single-phase (3 to 10 kW)
  • Efficiency up to 99 % according to Huawei
  • Wide range of interfaces: EEBUS, SG-Ready, OCPP and Modbus-TCP
  • Backup power integrated, switchover in under 10 ms, up to 20 kW
Disadvantages
  • Not yet on sale in Germany, prices and warranty still open
  • Technical data preliminary so far
  • A maximum of 4 packs per tower, i.e. 28 kWh
  • New platform without practical experience

Available from us today: the Huawei LUNA2000 battery storage with the matching SUN2000 inverters.

Sungrow PowerHarbor: advantages and disadvantages

The PowerHarbor was presented in June 2026 at Intersolar Europe. It is designed for higher power and starts at 10 kW. All details can be found in our guide Sungrow PowerHarbor.

Advantages
  • Powerful: 10 to 30 kW, up to 60 kWh per tower and 120 kWh with two systems
  • Three module sizes with 6, 9 and 10 kWh that can be mixed
  • EnergyBridge for backup power with 0 ms switchover according to the manufacturer
  • IP66 and corrosion protection C5, indoor and outdoor
Disadvantages
  • Not yet on sale in Germany, prices and warranty still open
  • Datasheets so far marked as “Preliminary”
  • Smallest power 10 kW, often more than needed for smaller houses
  • Heavy modules with 60 to 79 kg; the larger inverters with fans, typically 50 dB(A)

Available from us today: the Sungrow SBR and SBH batteries with the matching hybrid inverters.

Which system suits whom?

The right choice depends on the grid connection, the PV power, the wish for backup power and the timing. This is how we would classify it:

Single-family home, 8 to 15 kWp, with backup powerGoodWe ESA 10 or 12 kW with 10 to 16 kWh. Backup power is built in, the price per kWh is low and the system can be delivered right away.
Heat pump, electric car or large roof areaGoodWe ESA 15, 20, 25 or 29.9 kW with 8 kWh modules and 24 to 48 kWh. The high PV oversizing and the SG Ready connection suit this case well.
Quiet operation indoors, backup power not neededCanadian Solar EP Cube with 15 to 25 kWh. It is very quiet, the battery warranty is strong and a matching wallbox is available.
Single-phase connection or Huawei system, no time pressureHuawei LUTERRA S2 as soon as prices and warranty for Germany are fixed. Until then, LUNA2000 and SUN2000 are a good fit.
Large houses and small businesses from 10 kW, no time pressureSungrow PowerHarbor after its market launch. If you want to build now, choose the GoodWe ESA 15, 20, 25 or 29.9 kW.

Conclusion: our recommendation is the GoodWe ESA

Of the four systems, only two can actually be delivered today. Of these, the GoodWe ESA is the better choice for most houses. It offers the widest choice of power ratings and storage sizes, has backup power built in and, compared with the EP Cube, has the lower price per kWh in almost every size, especially if backup power is wanted.

There is a lot to be said for the ESA from a technical point of view: up to 200 % PV oversizing, IP66 with operation down to −35 °C, switchover in under 4 ms and direct connections for heat pump, wallbox and § 14a EnWG. On top of that, there is a 10-year warranty on the inverter and the battery.

However, there are also good reasons for other systems. The EP Cube is quieter and has the stronger battery warranty. LUTERRA S2 and PowerHarbor bring exciting technology, but prices, warranty and delivery dates for Germany are still missing. If you want to plan today and install soon, the GoodWe ESA is your best option.

Frequently asked questions about all-in-one storage

What is an all-in-one storage system?

A system in which the hybrid inverter, battery modules and energy management are matched to each other and are usually mounted as one tower. Compared with separate devices, this saves space, cables and installation time.

Do I need an extra device for backup power?

That depends on the system. The GoodWe ESA has the backup output built in. The EP Cube needs the Smart Gateway. According to Huawei, backup power is integrated in the LUTERRA S2; with the PowerHarbor, the EnergyBridge takes care of it.

Can I expand the storage later?

Yes, with all four systems. The GoodWe ESA takes up to 12 modules, i.e. up to 96 kWh with 8 kWh modules. According to GoodWe, old and new modules as well as different sizes can be combined. With the EP Cube, up to 40 kWh per system are possible, but for the warranty only within two years of installation.

Do the systems qualify for 0 % VAT?

Eligible private customers in Germany choose the purchase option “0 % (DE - Privat)” for storage systems and inverters in accordance with § 12 Abs. 3 UStG. Wallboxes are sold with 19 % VAT.

When will LUTERRA S2 and PowerHarbor be available?

Neither manufacturer has announced a binding date or prices for Germany yet. That is why the systems cannot yet be ordered from us.

May I install an all-in-one storage system myself?

No. According to the manufacturers’ manuals, only qualified electricians may install and commission the system. The system must also be registered with the grid operator.

Sources: GoodWe datasheet ESA series 5–30 kW (DE, V1.1), user manual ESA 5–30 kW (DE, V1.4), GoodWe warranty terms for inverters and for the LX D G2 battery (EU); EP Cube datasheet three-phase (DE, V2.7), EP Cube three-phase warranty statement (V1.1), EP EV Charger datasheet; Huawei product page and press release LUTERRA S2 as well as pv magazine of 17 November 2026; Sungrow preliminary datasheets SH10/12/15TA and SH17–30TA as well as the PowerHarbor product page.
Advice on your all-in-one storage system

GoodWe ESA and Canadian Solar EP Cube can be ordered from us right away. We will be happy to help you choose the right power and storage size.

View GoodWe ESAView EP CubeContact us
Back to blog